> Use the up/down arrow keys to select the Antenna settings (DVB-T) input
option.
> Press the OK key to call the antenna settings (DVB-T) menu.
> Position your antenna in such a way, that the level display shows maximum reception
strength for the channels receivable at your location.
Antenna supply
When using an active antenna without external power supply, it is necessary to switch the
antenna power supply (5V/30mA) on. The antenna is thereby supplied by means of the connec-
tion Antenna input, if the antenna permits power supply via the coaxial cable.
> For this purpose, select the antenna supply line with the up/down arrow keys.
> Switch the antenna supply with the left/right arrow keys to On or Off.
9 Station search function
There are various possibilities to carry out a programme search run, in order to set available or
new programmes.
1. Automatic search
Select this search run, in order to scan the complete reception range of TV set for programmes.
2. Extended search
Select this search run, in order to only scan one reception range (FM Radio, Analogue CT, DVB-
S, DVB-C or DVB-T) for programmes.
3. Manual search
Select this search run, in order to scan a channel, a frequency or a transponder for an analogue
programme or for digital programmes or to search for a certain programme after entering program-
me-specific PID numbers.
Calling the station search function
> For a programme search run, first call the main menu by pressing the Menu key.
> Use the up/down arrow keys to select the Station search line.
> Acknowledge with OK.
The Station search sub-menu is displayed.
> Use the up/down arrow keys to select the search run method and then acknowled-
ge with OK.
9.1 Automatic search
This search run function automatically scans the selected reception ranges for programmes.
> Use the left/right arrow keys to specify in the Search mode line the required
search mode (from All programmes to Only free programmes)
> Select the individual reception ranges (DVB-S, DVB-C, DVB-T,
Analogue CT or FM Radio) with the up/down arrow keys.
> Activate the reception ranges, which you would like scan by means of the right/left
arrow keys to Yes.
The reception ranges marked with No are not scanned during the automatic search run.
9.1.1 Starting the automatic search
> In order to start the search run, press the green Start search control key.
The duration of the search run depends on the selected reception ranges. Pay attention
to the screen inserts.
52
37779_HDvisionPVR_EN_.QXP 16.2.2007 9:21 Str. 52
