526754
17
Zoom out
Zoom in
Vorherige Seite
1/24
Nächste Seite
17

1- The TECHNITOOL S.M.A.R.T.program is required to upgrade firmware
Connect the instrument to the mains and turn it on.
Connect the USB cable FIRST to the meter and THEN to the PC.
Start the TECHNITOOL S.M.A.R.T. Program.
Click Instrument and thenUpgrade Instrument In the TECHNITOOL S.M.A.R.T.
program menu.
In the Open window, select the file to be used for up-grades and confirm the selection by
pressing theOpen key.
The Upgrade Firmware window will then open, where you can select the instrument
model.
Press “Upgrade” to start the up-grade.
When the up-grade has been completed correctly, the PC will show the message Program
Successful and a brief summary of the instrument settings.
Turn the instrument on and check the number of the new firmware version in the start-up
window or the Self-Test.
WARNING!
Do not switch-off, use or disconnect the Meter from the mains during the up-grade.
If the up-grade procedure is not successful:
- Check connections and repeat the operation
- If the operation described in this paragraph continues to fail, contact TECHNISAT
2- The PRO version of the TECHNITOOL S.M.A.R.T. program is required to load a MEM file
in your meter
Connect the instrument to the mains and turn it on.
Connect the USB cable FIRST to the meter and THEN to the PC.
Start the TECHNITOOL S.M.A.R.T. program.
Click Instrument and thenConnect Instrument in the TECHNITOOL S.M.A.R.T.
program menu.
A window will open where you can select your meter model and START the connection.
Click TOOLSand then MEM and OPEN MEM in the TECHNITOOL S.M.A.R.T. program
menu.
Select the MEM file downloaded from the TECHNISAT’s Service web site.
Click Instrument and thenMEM and WRITE MEM TO INSTRUMENTin the
TECHNITOOL S.M.A.R.T. program menu. TheTECHNITOOL S.M.A.R.T.program will upload
the new MEM file to your meter.
17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Technisat TECHNI-TOUCH wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info