When the maximums or minimums are displayed, press and hold the MAX-MIN button to reset both
records and it will start to record the maximums and minimums again.
IF YOU LOSE THE OUTDOOR TEMPERATURE AND HUMIDITY
When the outdoor temperature and humidity digits show '---", the wireless transmission is either
interrupted or lost. Press and hold the MAX-MIN / OUT TEMP button on the clock once. If you continue
to lose the outdoor temperature display, try placing the transmitter in a different location until you have
smooth transmission of temperature data.
TROUBLESHOOTING
In case your weather station clock shows irrelevant information or digits, it maybe affected by
electrostatic discharge or interferences from other devices. Press the RESET button on the top right of
your unit. Your unit will be reset to default settings and it will start to receive outdoor temperature and
humidity and then DCF signal again.
Problem Solution
LCD is blank 1. Press RESET on the main unit.
2. Replace fresh alkaline batteries.
No Outdoor Temperature and
Humidity is displayed
1. Press and hold MAX-MIN / OUT TEMP on the weather
station.
2. Press and hold MAX-MIN / OUT TEMP, then press RESET on
the outdoor sensor.
3. Observe if the Low Battery icon appears on the left of the
outdoor temperature. If yes, replace batteries in outdoor
sensor with fresh alkaline batteries.
4. No other interfering sources are being used (such as
computer monitors, TV sets, headphones, or speakers) in the
path of signal from the outdoor sensor. The signal travels in a
straight line, an electrical source near that “line” may cause
interference.
Temperature, humidity, or air
pressure is incorrect
1. Press RESET on the main unit.
2. Make sure your main unit and the outdoor sensor is away
from sources of heat / cold / direct sunshine.
DCF time and date will not set
or update
1. Wait until overnight for signal to be received.
2. Move your weather station away from sources of electricity.
Time is one or few hours off 1. Make sure you select the right time zone.
CARE OF YOUR WEATHER STATION CLOCK
1. Do not expose the unit to extreme temperature, water or direct sunlight.
2. Avoid contact with any corrosive materials.
3. Do not subject the unit to excessive force, dust or humidity.
4. Do not open the inner back case or tamper with any components of this unit.