Bedienungsanleitung Techno line WS 8006 (Seite 2 von 3) (Englisch)

542213

Zoom out

Zoom in

Vorherige Seite

1/3

Nächste Seite

WS 8006 Manual

` Press and hold down the “ALARM” button for two seconds until alarm time and the flashing icon are

displayed.

` The Hour display of the Alarm time starts to flash. Use the “▲” and “▼“buttons to set the required hour.

Press “ALARM” button to confirm your setting

` The Minute display of the Alarm time starts to flash,Use the “▲” and “▼buttons to set the required

minute. Press “ALARM” button to confirm your setting and to end the setting procedure.

` To activate or deactivate the daily alarms, in the alarm mode, press “UP” button to switch alarm

function.

F.Y.I.:

` After 7 seconds without pressing any button the clock switches automatically from setting mode to

Normal clock mode.

` The alarm will sound for 2 minutes if you do not deactivate it by pressing any button. In this case the

alarm will be repeated automatically after 24 hours.

` Rising alarm sound (crescendo, duration: 2 minutes) changes the volume 4 times whilst the alarm

signal is heard.

Automatic SNOOZE function:

` To activate the automatic snooze function: While the alarm is sounding, press the “SNOOZE” button to

activate the snooze function. When the snooze function is activated, the Alarm symbol appears in the

display.

` This operation moves the alarm back by 5 minutes and the alarm will restart at this time.

` The snooze function can be interrupted by pressing any button and can be repeated up to seven times.

°C/°F temperature display:

` The temperature is displayed either in °C or °F. Briefly pressing the “▼ “button allows you to switch

between the individual models.

Reception of the Radio signal:

` The clock automatically starts the DCF signal search after 7 minutes of any restart or changing of new

fresh batteries. The radio mast icon starts to flash.

` At 1:00 am, the clock automatically carries out the synchronization procedure with the DCF signal to

correct any deviations to the exact time. If this synchronization attempt is unsuccessful (the radio mast

icon disappears from the display), the system will automatically attempt another synchronization at the

next full one hour. This procedure is repeated automatically up to total 5 times.

` To start manual DCF signal reception, press the “WAVE“ button. If no signals received within 7 minutes,

then the DCF signal search stops (the radio mast icon disappears) and start again at the next full one

hour.

` During RC reception，to stop searching radio signal, Press and hold the “WAVE” button for two

seconds.

F.Y.I.:

` A flashing radio mast icon indicates that the DCF signal reception has started

` A continuously displayed radio mast icon indicates that the DCF signal was received successfully

` We recommend a minimum distance of 2.5 meters to all sources of interference, such as televisions or

computer monitors

` Radio reception is weaker in rooms with concrete walls (e.g.: in cellars) and in offices. In such extreme

circumstances, place the system close to the window.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Techno line WS 8006 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Techno line WS 8006

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info