4. Getting Started:
4.1 Main Unit
Open battery Cover (C1)
Insert 3 x AA size batteries observing polarity [“ +” and “ –“ marks]
Replace battery compartment cover. The product briefly shows all the display
segment
4.2 Rain Sensor
Battery compartment of rain sensor is locating on the bottom of unit (D1), unscrews
the batteries cover to open.
Insert 2 x AAA batteries observing polarity [ “+” and “–“ marks]
5. Installation
5.1 Main Unit
The main unit can be placed onto any flat surface (C3), or wall mounted by the hanging
hole (C1) at the back of the unit.
5.2 Rain sensor
The rain sensor should be placed onto outdoor flat surface..
Note: Transmissions between receiver and transmitter can reach up to 30m in open
area. Open Area: there are no interfering obstacles such as buildings, trees, vehicles,
high voltage lines, etc.
6. Manual Time Setting
Hold “SETTING” (B2) button for 3 seconds to enter time setting mode.
Press “▲” (B1) or “▼” (B4) button to adjust the setting and press “SETTING” button
(B2) to confirm each setting.
(By keeping the “▲” (B1) or “▼” (B4) button pressed, could accelerate the process
and reach the desired value more quickly)
The setting sequence is shown as follow: 12/24 Format, Hour, Minute, Year, Month/
Day Sequence, Month, Day, MM/Inch, C/F, and Rain Alert On/Off.
Note: All Setting modes will automatically exit in 15 seconds without any adjustment
