Bedienungsanleitung Techno line WS8016 (Seite 11 von 62) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Polnisch)

801527

Zoom out

Zoom in

Vorherige Seite

1/62

Nächste Seite

EN3

attempt another synchronization at the next full one hour. This procedure is repeated

automatically up to total 5 times.

 To manually start DCF signal reception, press the “WAVE” button once. If no signals received

within 7 minutes, then the DCF signal search stops (the radio mast icon disappears) and start

again at the next full one hour.

 To stop searching radio signal, press the “WAVE” button once.

Notes:

 A flashing radio mast icon indicates that the DCF signal reception has started

 A continuously displayed radio mast icon indicates that the DCF signal was received

successfully

 We recommend a minimum distance of 2.5 meters to all sources of interference, such as

televisions or computer monitors

 Radio reception is weaker in rooms with concrete walls (e.g.: in cellars) and in offices. In such

extreme circumstances, place the system close to the window.

 During the DCF radio receive mode, only the “WAVE” button function, other button

operation have no function, If you want to carry out other functions of operation, please press

“WAVE” button to exit the DCF radio receive mode.

Selecting RCC mode on/off:

 Hold the “WAVE” button until the beep tone sounds and “RCC OFF” is shortly displayed on the

LCD. The clock is now no longer using radio-controlled function.

 Hold the “WAVE” button again until the beep tone sounds and “RCC ON” is shortly displayed

on the LCD. The clock is using radio-controlled function again.

12-hour or 24-hour time display setting:

 Press the “DOWN” button to change the time displayed in 12-hour or 24-hour display.

Manual time setting:

 Press and hold down the “SET” button for 2 seconds, the button BEEP sound settings: ON or

OFF is displayed. Press the “UP” or “DOWN” button to set BEEP in ON or OFF.

 Press “SET” to confirm your setting, the time zone starts to flash. Press the “UP” or “DOWN”

button to set a correct time zone (-2 to +2). For example, select "0" for Germany or "-1" for the

United Kingdom.

 Press “SET” to confirm your setting, the hour display starts to flash. Press the “UP” or “DOWN”

button to set the correct hour.

 Press “SET” to confirm your setting, the minute displays starts to flash. Press the “UP” or

“DOWN” button to set the correct minute.

 Press “SET” to confirm your setting, the year display 2018 starts to flash. Press the “UP” or

“DOWN” button to set the correct year.

 Press “SET” button to confirm your setting, the month display starts to flash. Press the “UP” or

“DOWN” button to set the correct month.

 Press “SET” button to confirm your setting, the date display starts to flash. Press the “UP” or

“DOWN” button to set the correct date.

 Press “SET” button to confirm your setting, the language selection starts to flash. Press the

“UP” or “DOWN” button to select a language.

 Press “SET” to confirm your setting and to end the setting procedures, enter the clock mode.

Notes:

 After 20 seconds without pressing any button, the clock switches automatically from set mode

to normal time mode.

 The value of seconds is automatically reset to 00 if the value of minutes is changed.

 In the set time, you can hold the “UP” and “DOWN” button to quickly change the setting of the

value

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Techno line WS8016 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info