Bedienungsanleitung Techno line WS9069 (Seite 8 von 40) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Polnisch)

801412

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

EN3

then enter the radio control time reception mode.

Note:

 If bars are displayed at the outdoor or pool temperature, because the connection is broken

check the batteries in the transmitter.

 To manually start to find outdoor sensor signals, press the + button in normal display mode

once to find the outdoor temperature sensor or twice to find the pool transmitter. “LEARN” will

flash in the corresponding area of temperature sensor or pool sensor on display

Environmental reception effects

The station obtains the accurate time with wireless technology. Same as all wireless devices, the

reception is maybe affected by the following circumstances:

 long transmitting distance

 nearby mountains and valleys

 near freeway, railway, airports, high voltage cable etc.

 near construction site

 among tall buildings

 inside concrete buildings

 near electrical appliances (computers, TV’s, etc) and metallic structures

 inside moving vehicles

Place the station at a location with optimal signal, i.e. close to a window and away from metal

surfaces or electrical appliances.

Reception of the radio-controlled time signal:

 The clock automatically starts the DCF signal search after 7 minutes of any restart or changing

of new fresh batteries. The radio mast (RCC) icon starts to flash.

 At 1:00 / 2:00 / 3:00 / 4:00 / 5:00 the clock automatically starts the synchronization procedure

with the DCF signal to correct any deviations to the exact time. If this synchronization attempt

is unsuccessful (the radio mast icon disappears from the display), the system will automatically

attempt another synchronization at the next full one hour. This procedure is repeated

automatically up to total 5 times.

Notes:

 A flashing radio mast icon indicates that the DCF signal reception has started

 A continuously displayed radio mast icon indicates that the DCF signal was received

successfully

 We recommend a minimum distance of 2.5 meters to all sources of interference, such as

televisions or computer monitors

 Radio reception is weaker in rooms with concrete walls (e.g.: in cellars) and in offices. In such

circumstances, place the system close to the window.

Manual time setting

 Press and hold the SET button to enter setting mode and “0h” is flashing. Press the + button to

adjust the value within the range of -2 to +5. (0 for Germany, -1 for UK) The fitting time

difference will be added when displaying time, allowing the clock to use radio-controlled time in

different time zones.

 Press the SET button again, RCC is displayed and “ON” is flashing. Press the + button to

enable radio-controlled time with “ON” or disable it with “OFF”. When set to OFF, the clock will

only use quartz clock.

 Press the SET button again, “24h” is flashing. Press the + button to set 12 hour display mode

(12h) or 24 hour display mode (24h).

 Press the SET button again, the hour digits are flashing. Press the + button to set the hour.

 Press the SET button again, the minute digits are flashing. Press the + button to set the

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Techno line WS9069 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info