Bedienungsanleitung Techno line WS9135 (Seite 6 von 32) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Polnisch)

801429

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

 Press “ ” once to switch to alarm time display, it will back to normal when there is no key operation within 10 seconds.

 Hold “ ” more than 2 seconds to enter the alarm setting mode.

 While the alarm sounds, press “SNOOZE” and the alarm will ring again in 5 minutes.

4.2. Manual Setting mode

 In normal display, hold the “SET” button for more than 2 seconds to enter manual setting mode.

 The year digits flash on the LCD, press "+/C/F" or "-/wave" to adjust the year. Hold a button for more than 2 seconds to accelerate

this operation.

 Press “SET” once and the month digits flash on the LCD. Press "+/C/F" or "-/wave" to adjust the month.

 Press “SET” once and the date digits flash on the LCD. Press "+/C/F" or "-/wave" to adjust the date.

 Press “SET” once and "00" is flashing on the LCD. Press "+/C/F" or "-/wave" to adjust the time zone.

 Press “SET” once and "24 Hr" is flashing on the LCD. Press "+/C/F" or "-/wave" to choose between 12 Hr or 24 Hr time display.

 Press “SET” once and the hour digits flash on the LCD. Press "+/C/F" or "-/wave" to adjust the hour.

 Press “SET” once and the minute digits flash on the LCD. Press "+/C/F" or "-/wave" to adjust the minutes.

 Press “SET” again or press no key pressed for approx. 20 seconds to exit the setting mode.

4.3. Alarm Setting mode

 In normal mode, press the “” button once to display the alarm time, press “+/C/F” or “-/wave” to activate or deactivate the alarm.

 In normal mode or alarm time display mode, hold the “” button for more than 2 seconds to enter the alarm time setting mode.

 Press “ ” once and the hour digits flash on the LCD. Press "+/C/F" or "-/wave" to adjust the alarm hour. Hold a button for more than

2 seconds to accelerate this operation.

 Press “ ” once and the minute digits flash on the LCD. Press "+/C/F" or "-/wave" to adjust the alarm minutes.

 Press “ ” again or press no key pressed for approx. 20 seconds to exit the setting mode.

5. WEATHER ICONS

 The 7 weather forecast symbols: sunny, semi-sunny, cloudy, rainy, rainstorm, snow, heavy snow

6. ALARM FUNCTION

 While alarm, the icon flashes,

 While alarm, press ‘SNOOZE’ to start 5 minutes snooze time, icons & icons are flashing.

 Press other keys to stop the alarm

7. RF TEMPERATURE

 The station will automatically receive start the outdoor sensor reception for 3 minutes.

 Icon will be displayed.

 In normal mode, hold “+/C/F” more than 2 seconds to start the outdoor sensor reception, previous received data will be cleared.

 When in RF receiving mode, other keys are no function except “+/C/F” to exit.

 When the outdoor sensor was not received, it will be displayed again when a new signal is received.

8. DCF-77 Reception

1. DCF-77 will be automatically received after start or reset.

2. Press“-/WAVE” for 2 seconds to start the reception.

3. Automatic reception：On 1:00, 2:00 and 3:00. If the reception fails, it will continue at 4:00 and 5:00.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Techno line WS9135 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info