Bedienungsanleitung Techno line WS9612 (Seite 17 von 43) (Deutsch, Englisch, Französisch)

800396

Zoom out

Zoom in

Vorherige Seite

1/43

Nächste Seite

EN3

Initial operation

 Open the Weather Station battery compartment cover

 Insert 2 x AA batteries observing polarity [ “+” and “ –“ marks]

 When you insert the batteries, all icon on the LCD will light up for 3 seconds, and you will

hear a beep tone, then detect indoor temperature & humidity.

 The Weather Station will now start to make a connection to the outdoor remote sensor.

This operation takes about 3 minutes and will displayed by a flashing reception RF

antenna symbol in the “OUTDOOR” display area on the receiver.

 This now, Open the remote sensor battery compartment cover, Insert 2 x AA batteries

observing polarity [ “+” and “–“ marks]

 After receiver has created a connection to the outdoor remote sensor, After 3 minutes it

will enter the DCF Radio control time receive mode.

Reception of the Radio signal

 The weather station will enter DCF77 signal reception after receiving outdoor temperature

or 3 minutes after start up.

 At 1:00 /2:00 / 3:00 AM, the clock automatically carries out the synchronization procedure

with the DCF signal to correct any deviations to the exact time. If this synchronization

attempt is unsuccessful (the radio mast icon disappears from the display), the system will

automatically attempt another synchronization at the next full one hour. This procedure is

repeated automatically up to total 5 times.

 To start manual DCF signal reception, press and hold the “Wave” buttonB3 for 2 seconds.

If no signals received within 7 minutes, then the DCF signal search stops (the radio mast

icon disappears) and start again at the next full one hour.

 During DCF77 reception, to stop searching radio signal, press the “Wave” buttonB3 once.

Notes:

 A flashing radio mast icon indicates that the DCF signal reception has started

 A continuously displayed radio mast icon indicates that the DCF signal was received

successfully

 We recommend a minimum distance of 2.5 meters (8.2Feet) to all sources of interference,

such as televisions or computer monitors or switching power adapter.

 Radio reception is weaker in rooms with concrete walls (e.g.: in cellars) and in offices. In

such extreme circumstances, place the system close to the window.

 During the RC receive mode, only the "Light" B5 and “Wave”B3 buttons have a

function, other buttons are not functional. If you want to use all functions, please press

“Wave” button to exit the DCF77 reception.

Manual time setting

 In normal mode, press SET button to switch display date/ alarm time/ second.

 IN date or second mode, press and hold the SET button for 3 seconds, into the setting

mode, the set item will blink disp lay. Press “+” or “-” buttons to adjustment the value,

Press SET button to confirm the item has been set and go to the next one, the sequence

of setting items is as follows:

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Techno line WS9612 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info