Bedienungsanleitung Techno line WS9767 (Seite 7 von 40) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

801370

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

GB 2

ALARM SETTING

 Press and hold the ALARM button for 2 seconds, the AL icon appears on the display, the hour digits flash. Press the

SET/RESET button to set the desired alarm hours.

 Press the ALARM button again, the minute digits flash. Press the SET/RESET button to set the desired alarm minutes.

 Press the ALARM button again to store the alarm settings and return to normal time display. The clock will return to normal mode

in around 30 seconds if no further press of any other buttons.

Turn on or off the alarm

Single press the SET/RESET button during normal time display to turn on or off the alarm. When the alarm function is turned on the

icon appears on the display on top of the time digits.

Snooze function

When time reaches the set alarm time, the station will give a beep sound to wake you up. The icon will flash.

 Press the SNOOZE/CH/REGISTER button once to stop the alarm temporarily, the snooze icon Zz keeps flashing. The alarm will

beep again after snooze duration of 6 minutes.

 To stop the alarm, press any button except the SNOOZE/CH/REGISTER button when alarm is beeping. The snooze icon Zz

disappears. The alarm will beep again same time next day.

Note: Alarm duration is approximately 2 minutes.

TEMPERATURE DISPLAYS

The INDOOR temperature displays the temperature of the location of the temperature station.

The OUTDOOR temperature displays the temperature of the location of the outdoor temperature sensors (outdoor area or another

indoor rooms p.e. cellar, loft, etc.).

Outdoor transmitter reception and signal indicator

After the station is powered up, it starts to search for outdoor transmitter signal. The icon flashes. To start the reception of

outdoor transmitter signal manually, press and hold the SNOOZE/CH/REGISTER button for 2 seconds.

Receiving signal ( icon flashing)

Successful reception ( icon becomes static)

Failed reception ( icon disappear)

Press the SNOOZE/CH/REGISTER button once to display continually the temperature of only one outdoor sensor (1 channel).

Press the SNOOZE/CH/REGISTER button repeatedly to display sequentially the temperatures of all outdoor sensors (channel 1, 2

and 3).

Press the SNOOZE/CH/REGISTER button repeatedly until the icon is shown. The temperature display will switch automatically

between all 3 outdoor sensor channels (channel 1, 2 and 3). Press the SNOOZE/CH/REGISTER button to cancel.

°C/°F Display

Press and hold the SELECT button for 2 seconds, the temperature display format °C/°F flashes. Press the SET/RESET button to

select the °C (Celsius) or °F (Fahrenheit) temperature display format. Press the SELECT button again to store the setting.

Temperature trend indicator

The indoor and outdoor temperature trend indicators are updated every 30 minutes. These trend indicators represent the

temperature changes over the past three hours:

Temperature rose more than 1°C (2°F) in the past three hours.

Temperature has not changed more than 1°C (2°F) in the past three hours.

Temperature fell off more than 1°C (2°F) in the past three hours.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Techno line WS9767 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info