424807
11
Zoom out
Zoom in
Vorherige Seite
1/41
Nächste Seite
www.technomate.com
1918
Your Digital Partner for Life
1. Press the MENU button on the remote to
display the main menu.
2. Use the / and / buttons on the
remote to move in the menu.
3. Select Motorized Setting, the Motorized
Setting menu will appear.
4. Select each menu you want to edit /
change.
- Satellite : Select any satellite by pressing /
buttons on the remote.
- Transponder : Displays the current TP value of the selected satellite.
- DiSEqC Motor : Select DiSEqC Motor type OFF/1.2/USALS.
- Save : Press OK button on the remote to save.
5. Scan : Press Red ( ) button on the remote to begin satellite search.
6. Auto Navigation : Press Green ( ) button on the remote to begin auto
navigation.
1. Select DiSEqC 1.2 on DiSEqC Motor, the DiSEqC 1.2 menu will appear.
- Satellite : Select any satellite by pressing /
buttons.
- Transponder : Displays the current TP value of the
selected satellite.
- DiSEqC Motor : Selected DiSEqC 1.2
- Move : Move the dish position to west/east by
pressing / buttons.
- Move Fine : Move the dish position 1 step at a time
to west/east by pressing / buttons.
- Motor Control : Control motor by press OK button
on the remote.
Recalculate : Recalculate the position of all other saved satellites relative to the known
position.
Reset System : Reset the position of all saved satellites.
Goto Reference : Move the dish to the 0 position.
1. Select USALS on DiSEqC Motor, the USALS menu will appear.
- Satellite : Select any satellite by pressing /
buttons.
- Transponder : Display the current TP value of the
selected satellite.
- DiSEqC Motor : Select DiSEqC Motor USALS.
- Move : Move the dish position to West/East by
pressing / buttons.
- Motor Control : Control Motor by press OK button
on the remote.
Goto Reference : Goto reference by pressing OK
button.
Delete Limit : Delete limit by pressing OK button.
Enable Limit : Enable the saved east and west
limit.
Set East Limit : Edit & Save east limit by pressing /
or OK buttons.
Set West Limit : Edit & Save west limit by pressing
/ or OK buttons.
- Sat Degree : Displays the current degree of the
selected satellite.
Edit degree by pressing / buttons
and numeric buttons.
Delete Limit : Delete east and west limit.
Enable Limit : Enable the saved east and west
limit.
Set East Limit : Edit & Save east limit by pressing
/ or OK buttons.
Set West Limit : Edit & Save west limit by pressing
/ or OK buttons.
- Go To : Go to the position of the saved satellite.
- Save : Save the current setting of DiSEqC 1.2 system.
2. Scan : Press Red ( ) button on the
remote to begin satellite search.
3. Auto Navigation : Press Green ( ) button on the remote to begin auto
navigation.
Motorized Setting
DiSEqC 1.2 Setup
USALS System Setup
11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Technomate tm 6800 hd wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info