424807
17
Zoom out
Zoom in
Vorherige Seite
1/41
Nächste Seite
If the Network supports DHCP, IP settings can
be allocated automatically. If the Network
does not support DHCP, the Addresses must
enter manually (Static IP).
- DHCP Usage : On/Off to receive IP settings
automatically
- IP Address : Here enter the IP address
- Subnet Mask : Here enter Subnet Mask Number
from your Network
- Gateway : Here enter IP address of Gateway (e.g.
router)
- DNS : Here Enter IP address of main DNS Server
- Mac Address : Mac Address display
www.technomate.com
30 31
Your Digital Partner for Life
This sub-menu allows you to set the blue light &
text moving on the front display window.
- Blue Light : Turn the blue light ON/OFF.
- Text Moving : Turn the text moving ON/OFF.
-
Channel Number : Turn the channel number
ON/OFF.
- Standby Mode : Select the standby Mode. (Normal
/ Power Saving)
Front Display Setting
This sub-menu allows you to change the
password option to access or lock menu entry
and to change password.
- Receiver Lock : If you turn it ON, you will be asked
to enter PIN code when power on.
- Remote / Ch / Install Lock :
If you turn it ON, you will be asked to enter PIN code
when you go to Installation/Edit Channels and
When you use Function keys on the remote.
- Lock Channel Confirm :
If you turn it ON, you wil be asked to enter PIN code
when you switch to a locked channel.
- Age Limit :
Prevents children or unauthorized people from
watching the specific prgrams.
(Free / 8 above / 12 above / 15 above / 18 above)
- Current Password : Enter current password to
change password.
- New Password : Enter the new password you want
to change.
- Verify Password : Enter new password to confirm.
* Note : The default password is 0000.
Password Setting
This sub-menu allows you to restore the factory
setting if the users encounters a problem after
changing any settings.
- Delete Radio Channels : Erase all radio channels.
- Delete Scramble Channels : Erase all scramble
channels.
- Delete All Channels : Erase all channels and restore
default setting.
- Factory Reset : Erase all channels and restore
factory default setting.
-
Save As Default Channel : Change the factory
channels.
- Restore Default Channels : Restores 25 satellites and
approx 1,500 channels
pre-tuned.
Factory Reset
IP Setting
17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Technomate tm 6800 hd wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info