486782

Technomate TM-7100 HD Seite 4

4
Zoom out
Zoom in
Vorherige Seite
1/42
Nächste Seite
www.technomate.com
54
Your Digital Partner for Life
This receiver is preinstalled with 25 Satellite and 1500 default Channels and is fully configured.
No settings need to be changed.
After turning ON the receiver, select a language and Country. You will be taken to the
Viewing mode. Press the SAT button on the Remote and select a satellite. To bring up the
Channel List, press the OK button on the remote.
To delete unwanted Satellites-press the MENU button on the remote and go to Installation.
Press OK and OK on Satellite Setup. Press OK again and a Satellite List will appear. To delete a
Satellite, press the BLUE( ) button on the remote.
This receiver is preinstalled with 25 Satellite and 1500 default Channels, and is fully
configured.No settings need to be changed.
Press the MENU button on the remote.Press OK on Installation. Go to Motorised Setting and
press OK. Go to the Third line (DiSEqC Motor) and use the Left/Right arrow buttons on the
remote to select USALS. Then go to Position Setting and press OK. Then go to Longitude and
Latitude and enter the coordinates of where you live (London’s Longitude is 000. 1 West;
South of UK’s Latitude is 51.5 North).Press the EXIT button on the remote. Go to GOTO and
press OK. Wait until the Signal Quality is more than 40% in the progress bar. When a Satellite is
found, then all the selected 25 Satellites are fully configured for a Motorised system.
If the Signal Quality is below 40%, then the settings are incorrect and the Longitude needs to
be adjusted, for example: 000.2, 000.3, 000.4,5/6/7/8/9 West or East. The Latitude may also
need to be adjusted. If you still have not got a signal, then the external installation (dish, etc)
needs to be adjusted.
Press the MENU button on the remote and go to Installation and press OK. Go to Motorised
Setting and press OK. Press OK again to open the satellite list. Select a satellite from the list
and press OK. Go to the Third line (DiSEqC Motor) and use the Left/Right buttons on the
remote to select DiSEqC 1.2. Go to Move and press and hold the Left/Right buttons on the
remote until you get a Signal Quality of more than 40%. Go to Save and press OK. Press the
RED( )button on the remote to Scan. To scan extra satellites, repeat the above.
How to Motorise 25 Satellite & 1500 Channels with USALS in 60secs
How to Motorise 25 Satellite & 1500 Channels with USALS in 60secs
How to Setup a DiSEqC 1.2 Motorised System
How to Setup a DiSEqC 1.2 Motorised System
If you want to start the receiver without the preinstalled Satellites and Channels, press the
MENU button on the remote and go to System Settings and press the OK button. Go to
Factory Reset, press OK and enter 0000. Then select Factory Reset. Press OK and select Yes.
How to do a Factory Reset to Delete the Preinstalled Satellites and Channels
How to do a Factory Reset to Delete the Preinstalled Satellites and Channels
Press the MENU button on the remote and press the OK button on Installation. Press OK on
Satellite Setup and OK again to display a Satellite List. To add a Satellite, press the YELLOW
( )button on the remote. Press the EXIT button on the remote to exit the list.
When the Quality Bar is at its highest level, press the RED( ) button on the remote to Scan
the Satellite. To view a channel, press the OK button in
the Viewing Mode (clear screen) and select any channel. To view $ (Scrambled) channels, a
CAM (Decoder) and a viewing card are required.
Press the MENU button on the remote and press the OK button on Installation. Press OK on
Satellite Setup and OK again to display a Satellite List. Select a Satellite (e.g. Hotbird 13E and
Astra 19.2E) and press the YELLOW button on the remote for each Satellite to Save. Press the
EXIT button on the remote to exit the list.
Go to DiSEqC Switching and select a Satellite (e.g. Hotbird 13E as Number 1 and Astra 19.2E as
Number 2). When the Quality Bar is at its highest level for each Satellite, press the RED ()
button on the remote to Scan. To view a channel, press the OK button in the Viewing
Mode (clear screen) and select any channel. To view $ (Scrambled) channels, a CAM
(Decoder) and a viewing card are required.
If the above installation was not successful, change the DiSEqC Switching number, e.g. Hotbird
13E as Number 2 and Astra 19E as Number 1.
How to Install a New Satellite (Fixed Non-Motorised System)
How to Install a New Satellite (Fixed Non-Motorised System)
How to Setup a Monoblock or DiSEqC Switch (up to 4 LNBs / Dishes)
How to Setup a Monoblock or DiSEqC Switch (up to 4 LNBs / Dishes)
Press the MENU button on the remote and press the OK button on Installation. Press OK on
Satellite Setup and OK again to display a Satellite List. Select a Satellite (e.g. Hotbird 13E and
Astra 19.2E) and press the YELLOW button on the remote for each Satellite to Save.
Press the EXIT button on the remote to exit the list.
Press the EXIT button again. Press OK on Motorised Setting. Press OK again to display a Satellite
List. Select a Satellite and press OK. Go to the Third line (DiSEqC Motor) and use the Left/Right
buttons on the remote to select DiSEqC 1.2. Go to Move and press and hold the Left/Right
buttons on the remote until you get a Signal Quality of more than 40%. Go to Save and press
OK. Press the RED button on the remote to Scan. Repeat the above for more satellites.
How to Setup DiSEqC 1.2 Motorised System
How to Setup DiSEqC 1.2 Motorised System
Press the MENU button on the remote and press the OK button on Installation. Press OK on
Satellite Setup and OK again to display a Satellite List. Select a Satellite (e.g. Hotbird 13E and
Astra 19.2E) and press the YELLOW ( ) button on the remote for each Satellite to Save.
Press the EXIT button on the remote to exit the list.
Press the EXIT button again. Go to Motorised Setting and press OK. Go to the Third line (DiSEqC
Motor) and use the Left/Right arrow buttons on the remote to select USALS. Then go to Position
Setting and press OK. Then go to Longitude and Latitude and enter the coordinates of where
you live (London’s Longitude is 000.1 West; South of UK’s Latitude is 51.5 North). Press the EXIT
button on the remote. Go to GOTO and press OK. Wait until the Signal Quality is more than 40%
in the progress bar. Press the RED ( ) button on the remote to Scan.
How to Setup a USALS Motorised System
How to Setup a USALS Motorised System
… 4 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Technomate TM-7100 HD wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info