628136
11
Zoom out
Zoom in
Vorherige Seite
1/21
Nächste Seite
1. Short press the [VF] button with a "BB" sound into frequency status.
2. Long press [VF button with a "B" sound to activate the Auto-scan function.
3. If you want to store that station, simply press on the [M] button to store the station with a
long "B--" sound. Keep store up your stations when auto search is activated unit it is
done.
LISTEN TO PRESET STATIONS
Method 1: Memory search manually
1. Short press the [VM] button with a "B" sound.
2. Rotate the [TUNING] knob for those stations in the memory.
Method 2: Auto browse pre-stored stations
1. Short press the [VM] button with a "B" sound.
2. Long press the [VM] button with a "B" sound to activate the auto scan memory function.
It will search all the stations within the memory, and stop on each station for 5 seconds.
3. To stop auto search memory, simply press [VM] button.
Note: If radio station has been searched & stopped for 5 seconds, press & release
[DELETE] to delete the current station.
Method 3: Direct key in the station address number
1. Short press the [VM] button with a "B" sound and are in station address status.
2. Use the numeric keypad to key in the memory number in 3 digits. For example, if the
desired radio station is in memory number 006, just press 0, 0, 6, and it will go to
memory 006.
NOTE:
When " - - - - " appeared in the display with a "B" sound after you key in a number of the
memory, means there is nothing stored.
DELETE MEMORY
Method 1: Manual delete memory
1. Short press the [VM] button with a "B" sound.
2. Rotate the [TUNING] knob to the proposed stations to be deleted in the memory.
3. Long press the [DELETE] button with a "B" sound.
4. Short press [DELETE] button again to confirm with a long "B- -" sound.
Note:
If "DEL" is flashing more than 3 seconds without confirmation, it will exit the delete
function automatically.
Method 2: Semi auto-delete radio stations
Function advantage: Using the auto-browsing functions to delete undesired pre-stored
radio stations quickly.
1. Short press the [VM] button with a "B" sound.
www.tecsunradio.com hch@cantonmade.com
11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

tecsun-pl380

Suche zurücksetzen

  • wie werden ukw Sender in die Speicherplätze eingegeben Eingereicht am 3-3-2019 18:31

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Tecsun PL380 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info