628134
6
Zoom out
Zoom in
Vorherige Seite
1/14
Nächste Seite
2.Press & hold the [VF] button with [ ] advancing to scan from one station to
another, staying on each station for about 5 seconds.
3.To stop the auto browse function, simply press the [VF] button.
Note: While operating the “Auto Browse Station” function, you can press the [M]
button anytime to store the station into memory, and the radio will keep on auto
browsing the next available station.
WORKING WITH STATION MEMORIES
There are total 550 preset memories within the unit. 100 preset memories for each FM,
MW, and LW band, and 250 for SW.
FM ATS:
1. Fully extend the telescopic antenna and press the [FM]
button to select FM band.
2. Press & hold the [FM] button with “PRESET ” flashing and
the frequency start running, then you can scan and store
your desired stations within the present band. When the
frequency stop running, it means the ATS operation has
been completed; then rotate the [TUNING] knob for those
scanned and stored stations.
MW/LW ATS:
Press the [MW] button to select MW/LW band, then follow step 2 of FM ATS.
SW ATS:
Fully extend the telescopic antenna and press the SW[ ] or [ ] button to select SW
band. There are two modes for SW ATS tuning:
Mode A: Press & hold the [ ] button to ATS the stations within all meter bands
Mode B: Press & hold the [ ] button to ATS the stations within present meter band
only.rotate the radio for better location (MW & LW).
Notes:
1. During ATS process in FM, MW / LW or SW (mode A), pre-stored radio stations
will be replaced automatically by the new searched stations.
2. With ATS in SW (mode B), those existing memories will not be replaced; all the
newly found radio stations would be stored in the blank memories addresses.
3. If there is too many interference in you surrounding or many mirror/blank station
being stored during ATS, you should contract the telescopic antenna (FM & SW)
or rotate the radio for better location (MW & LW).
METHOD 2: MANUAL STORING STATON
1. Select band and tune to your desired station.
www.tecsunradio.com hch@cantonmade.com
6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Tecsun PL606 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info