11- PUTTING YOUR STEAM GENERATOR AWAY
1. Place the iron on the rest.
2. Unplug the appliance from the socket
3. Press the cord reel button and guide the cord with your hand .
4. It is best to leave your generator to cool down before putting it away.
If you put it away straightaway be careful because it will be hot.
17
10- RINSING OUT THE BOILER
1. Check that the generator is cold and unplugged for more than 2 hours, and that the
removable water tank is empty.
2. Place your steam generator on the edge of your sink.
3. Unscrew the cord clip by turning a quarter turn to the left .
4. Using a coin, unscrew the boiler drain plug .
5. Holding your steam generator in a tilted position, and using a jug, fill the boiler (in the base unit) with
1/4 litre of water .
6. Shake the base unit for a few moments and then empty it completely over a sink or bucket .
To obtain the best result, we recommend that this operation is done twice.
7. Important : before re-closing, make sure no water remains in the boiler.
8. Replace and tighten up the boiler drain plug with a coin.
9. Put the cord clip back in place.
16
15
14
13
Be careful:
• To extend the life of your boiler and to avoid any build up of scale, it is essential that
you rinse out the boiler after approximately every 10 uses. If your water is hard,
increase the frequency.
• Do not use descaling agents for rinsing out the boiler, as they could damage it.
17
13
14
15
16
