Bedienungsanleitung Tefal BL850D Mastermix (Seite 71 von 90) (Englisch, Holländisch, Spanisch, Polnisch, Türkisch)

659550

Zoom out

Zoom in

Vorherige Seite

1/90

Nächste Seite

66 67

USING YOUR APPLIANCE

• Moisten the seal (C3) and position

it correctly onto the blade unit

(C1).

• Place the assembly (C1+C3) on

the base of the jug (C4). Lock it

by rotating the blade unit through

a quarter turn in the anticlockwise

direction. (Fig. 2).

• Place the ingredients into the

assembled jug without exceeding

the maximum level indicated:

* 1,75 litres

• Fit the lid (C5) on the jug. Place the

measuring cap (C6) in its recess

on the lid.

• Place the blender jug assembly

• Make sure that the appliance has

been switched off and position

the jug on the motor unit so that

the notches of the jug engage

with the grooves on the motor unit.

Check that the jug is positioned

horizontally and the appliance

is on a flat, stable, heat-resistant

surface away from sources of heat

or water splashes.

• The blender motor runs the blades

at high speed in order to ensure

thorough mixing. Consequently,

it is important that the blender is

always placed on a flat, dry surface

before it is operated. Check that

the jug is positioned correctly on

the motor unit. If not, the blender

will not operate.

• Never use the blender for more

than 3 minutes at a time. Let the

blender rest for 1 minute before you

operate it again (in order to avoid

overheating).

Caution: leaks can occur if the

jug is not locked correctly.

• Plug in the appliance and turn the

function selector to “program”,

and the indicator lights of the on/

off button and the function buttons

start flashing. Choose the optional

program function by means of the

buttons “ice crush”, “smoothie” or

“auto-clean”. Each function has

a programed processing time

(see more under the different

functions), but blending can be

stopped manually by pressing the

on/off button in the middle of the

function selector. The blender also

has a variable speed selector that

is activated by turning the function

button to setting min-max.

• Your appliance is equipped with

a thermal cut-out. In case of

overheating your appliance will turn

off automatically. Disconnect the

appliance and let it cool down for

about 30 minutes, then resume use.

Functions of the blender:

Ice crush: Put max 200 g of ice

cubes in the jug. The blender works

in pulse intervals for approx. 1 minute

unless it is switched off manually by

means of the on/off button or by

pressing the ice crush button.

Smoothie: The blender works at

various speeds alternating for

approx. 1 minute unless it is switched

off manually by means of the on/ off

button or by pressing the smoothie

button.

Auto Clean: This function allows

you to clean the jug. Add 1250ml of

warm water and a drop of washing

up liquid inside the blender jug. Press

Autoclean button.

The blender works at various speeds

alternating for 45 seconds, unless it is

switched off manually by means of

the on/off button or by pressing the

Autoclean button again. Then rinse

thoroughly.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tefal BL850D Mastermix Seite 71

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info