(decrease) buttons.
•
You then have to validate the temperature chosen by
pressing the
•
OK button.
•
The red indicator light illuminates and a 'beep' will
sound to inform you that the cooking has started.
•
At any point you can adjust the motor onto either:
- slow speed (position 1) to mix liquid ingredients (e.g.
to make sauces).
- quick speed (position 2 onwards) to mix solid
ingredients.
BLENDER MODE (without cooking)
• Select a speed by turning the speed
selector to the right. The mixing starts
and the time appears on the screen.
In blender mode, you can select up to 5 speeds with
different mixing types.
The pulse speed can be found to the left of
position 0.
• Turn the speed selector to position 0 to stop the
appliance.
• Press on the trigger (d2) then remove the blender jug
(D). If you wish to program an operation time which
stops automatically:
• Adjust the operation time with the aid of the +
(increase) and - (decrease) buttons.
• Select a speed by turning the speed selector. The
count time appears on the screen.
• The motor stops automatically at the end of the
count time.
Ice crushing button: The "Ice" button starts the ice
crushing operation; this takes 30 seconds. You can stop
the appliance as required by pressing the "OFF" button.
You can crush a maximum of 6 to 8 ice cubes.
15
• Do not immerse the appliance in water. Never put the
motor unit (A) under hot running water.
• Clean the jug immediately after use.
• Fill up the jug with 1 litre of hot water along with 2 or
3 drops of washing up liquid Only use the
recommended amount of water and washing up
liquid. An excess of washing up liquid creates more
foam and consequently can lead to overflowing.
• Use the automatic Autoclean programme: P3 or P4
(depending on model*) to carry out a prewash of the
bowl.
• Once the program has stopped, unplug the
appliance.
• Press on the trigger (d2) then remove the blender jug
(D).
• Place the jug on a flat surface.
• Unlock the lid by turning it a quarter turn clockwise.
Remove the lid with care.
• When the parts have cooled down, unclip the lid's
carrier seal with the aid of the gripping system.
• Finish cleaning the jug with the aid of a sponge.
• Rinse the inside of the jug and the lid under running
water.
• In the event of the heated part of the jug getting
extremely dirty, leave to soak for a few hours in a mix
of water and washing up liquid to help get it clean.
• Take care when cleaning the blades
(d3) in the blender jug and when you
empty the bowl as they are sharp.
• Use a damp cloth to clean the motor unit (A). Dry it
carefully.
• The detachable parts (lid, carrier seal, seal, measuring
cap, cooking basket) can be cleaned with a sponge
and hot soapy water.
CLEANING THE APPLIANCE
14
USING THE APPLIANCE
PROGRAM MODE
Once the water and the ingredients are placed into the jug or into the steam basket, lock the lid and position the jug onto
t
he motor unit (see before first use).
Select one of the automatic programs suggested below (P button) and validate (OK button). The red indicator light
illuminates and a 'beep' will sound to inform you that the cooking has started.
When the program is finished, the appliance gives out 3 beeps.
Unlock the jug by pressing the trigger (d2) located on the inside of the handle (cf. Fig. 9) and serve immediately or leave
the jug in place to keep warm (up to 40 minutes).
Introducing the suggested automatic programs
Temperature (Max) Adjustable times Mixing
P1 - Creamy soup
(thin texture)
100°C
25 min.
(+ or -10 min)
Max speed
1 min
P2 - Chunky Soup
(texture dense)
100°C
35 min.
(+ or -10 min)
Min speed
13 secs
P3 - (only for model with cooking
basket) – Steam cooking with
cooking basket and 50 cl water
(depending on model*)
100°C
30 min.
(+ or -20 min)
No
P3 - (or P4 for model with cooking
basket) - Autoclean: automatic
cleaning programme
100°C
30 s.
(adjustable
up to 1 min)
Max speed
PRACTICAL GUIDANCE
• Make sure you have enough liquid to cover the Min
limit marker (Cf. Fig. 7). and take care not to exceed
the 1.8 L MAX limit marker engraved inside the jug
(Cf. Fig. 8).
• Some recipes may cause sudden overflowing, due to
the formation of bubbles, particularly when using
frozen vegetables. In this case, it is up to you to
reduce the quantities accordingly.
• Time and temperature information is flashing: you
can modify this information. Adjust the time as
required with the aid of the + (increase) and -
(decrease) buttons, depending on the ingredients
used and the amount to be made (see table of the
cooking times for soups in the recipe booklet).
• With the cooking basket (depending on model*) you
can steam cook (use P3 with 0.5 litres of water), or
for chunky soup recipes and cooking whole
ingredients such as meat, fish, vegetables at the
same time as your soup (use P1 or P2).
• At the end of the programs, the appliance
automatically keeps the recipe warm for 40 minutes
so it remains ready to be consumed. To stop
warming, simply press the OFF button.
• If you open the lid, press the trigger or remove the
jug, the warming process will automatically stop.
• When the program has started, you can stop the
appliance at any time by pressing the P button (2
beeps will sound). The program is then in pause
mode and you can restart it by pressing the P button
again or by pressing the OK button (a beep signal will
be emitted).
• If you choose the wrong program by mistake and you
wish to cancel it, press the OFF button for 2 seconds
and that will allow you to restart the times and the
temperatures.
MANUAL MODE
•
Adjust the cooking time with the aid of the + (increase)
and - (decrease) buttons, depending on the ingredients
used and the amount to be made (see table of the
cooking times for soups in the recipe booklet).
•
You have to then validate the time chosen by pressing
the OK button.
•
The temperature information is flashing, you can
change this information. Adjust the cooking
temperature with the aid of the + (increase) and -
