Bedienungsanleitung Tefal BL91HD - InfinyMix plus (Seite 4 von 66) (Alle Sprachen)

785979

Zoom out

Zoom in

Vorherige Seite

1/66

Nächste Seite

With the on the go bottle (E) you can manage the blending speed from 1 to 7 by pressing

the setting +/- buttons (K). You can also set up the running time by pressing the setting

+/- buttons (K) between 5 seconds and 90 seconds. Your blender will stop automatically at the

end of the program. If you want to stop the blender before the automatic end of the program,

press on the Start/Stop button (G).

When using the blender, do not use any accessories other than the pusher to avoid damaging

the bowl.

Less than 3 minutes of mixing are enough to blend liquids for most recipes.

To add ingredients while blending, remove the middle cap from the lid and add the ingredients

through the feeder hole. Beware of the risk of spatter.

WARNING: After running one cycle in the blender for the maximum processing time, let the

blender rest for 1 minute before operating it again. After using the blender for a maximum of

two cycles, stop the appliance and leave to cool to room temperature (takes about 2 hours).

The appliance is fitted with overload protection. This prevents the motor from being damaged

by abnormal usage.

If the appliance switches off during operation, proceed as follows:

Unplug and leave to cool down for around 15 to 20 minutes.

Reconnect the appliance to the power supply and resume blending.

After approx. 3 minutes without use, your appliance will start a standby mode. To switch on your

appliance again, press the Start/Stop button (G).

ROUGH CHOPPING SMALL QUANTITIES

Accessory used: assembled chopper

Chop in a few seconds by pulsing (L): peanuts, almonds etc.

Model 1600 w: quantity/max. time: 140 g peanuts/8 seconds or 150 g almonds/8 seconds

ASSEMBLING AND FITTING THE ON THE GO BOTTLE

Moisten the seal (E3) (even if already fitted on the blades unit (E4)). Be careful to correctly fit

the seal back onto the blades unit (E4) the correct way up (Fig 9).

Add the ingredients into the bottle without exceeding the maximum level indicated:

* 400ml for thick mixtures

* 600ml for liquids

Warning: Do not pour boiling liquids (over 80°C/176°F) into the bottle.

Place the blades unit (E3+E4) on the locking ring (E5) (Fig. 10). Turn the jar (E2) upside down

and assemble the locking ring with the blades on the base of the jar (Fig. 11) by locking it in

the clockwise direction.

Turn the bottle upside down and position it correctly on the motor unit. Lock it by rotating it

in the clockwise direction (Fig. 12). A bottle logo will appear on the screen (I) and a beep

signal will sound.

USING YOUR APPLIANCE

Put the appliance on a flat, stable, heat-resistant surface away from heat sources or water.

Plug your appliance in and select your program (J) or manual settings

(K)

(time and speed) and

press the Start/Stop button (G).

With the jar (A) you can change the blending speed from 1 to 9 by pressing speed program

then the setting +/- ("H" being the maximum speed), and you can also set up the running time

by pressing time program then setting +/- (K) between 5 seconds and 3 minutes.

Add the ingredients into the assembled jar without exceeding the maximum level indicated

(Figures 4 and 5):

* 1.75 L for thick mixtures

* 1.5 L for liquid preparations

Warning: Do not pour boiling liquids (over 80°C/176°F) into the jar.

Lock the lid on the jar and lock in the clockwise direction (Fig. 6). Make sure the lid is locked

correctly: the point on the lid should be aligned with point on the handle (Fig. 7). Lock the

middle cap in position on the lid and lock it by rotating it in the clockwise direction. If the lid

is not correctly locked, your appliance will not start; Position the jar correctly on the motor unit

(Fig. 8): the point on the jar should aligned with the lock on the motor unit (Fig. 8). A jar logo

will appear on the screen (H) and a beep signal will sound.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tefal BL91HD - InfinyMix plus Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info