Bedienungsanleitung Tefal BR3031 - Quick Hot (Seite 8 von 31) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch)

720825

Zoom out

Zoom in

Vorherige Seite

1/31

Nächste Seite

Thank you for purchasing this Quick and Hot water urn. Please read the instructions common to all of

our models carefully and keep them in a safe place.

PRODUCT DESCRIPTION (fig. 1)

RINSING BEFORE USING FOR THE FIRST TIME

1 Remove all of the packaging, stickers and accessories from the interior and exterior of the appliance.

2 Remove tank A and clean it in water, taking care that no particles remain in the tank.

3 Then fill the tank A with cold water and reposition it firmly on its base D making sure that the release valve

C is properly engaged (fig. 1a, 1B and 2).

4 Plug in the appliance to an electrical supply of the correct voltage.

5 Place a container that holds approximately 1.5 litre under tap E

6 Press the continuous water supply button H: hot water will begin to run out (fig. 3).

When operating for the first time, it is normal that a little steam escapes from nozzle E.

7 When the container is almost full, release the continuous water supply button H to stop the flow. Discard

the water.

INSTALLING THE CLARIS FILTER CARTRIDGE

(according to models)

• We advise you to get the best taste and service lifetime of your appliance by using the Claris - Aqua Filter

System cartridge. This cartridge contains an anti-lime substance and activated carbon that reduces chlorine,

impurities, lead, copper, pesticides, etc. that are present in water. Minerals and trace elements, however, are

preserved.

1 Unwrap cartridge J. Take note of the month in which the cartridge is put in use by sliding the upper ring of

the filter to the use start date (fig. 4). You should change your Claris Filter Cartridge every 4 to 6 weeks

(or every 50 litres), according to the hardness of your water.

Certain models also have an indicator light K which indicates when it is necessary to change the cartridge.

For these models, when this light K flashes during use, it is time to change the cartridge (fig. 5).

2 Position the cartridge in tank A and screw the cartridge J a quarter turn into the bottom of the tank.

3 To replace the cartridge, remove the used cartridge and fit a new Claris Aquafilter system cartridge sold as

an accessory (Ref. XH 5000) (fig. 6).

4 For models with an indicator light, it is necessary to record the change of the cartridge by simultaneously

pressing the “continuous water supply” button and the mug pre-select button G for 5 seconds (fig. 7).

After 5 seconds, the indicator light will go out. The appliance will then have recorded the cartridge change.

• The Claris AquaFilter cartridge can be installed in all Tefal water urns, including those that did not have it

on purchase.

A water tank

B tank lid

C water release valve

D body of the appliance

E nozzle or water outlet

G automatic mug button for pre-setting

quantity

H manual “continuous water supply” button

I water volume selector (according to model)

J filter cartridge (according to model)

K ON/OFF and filter cartridge change light

(according to model)

Notice Tefal BR 301141:Mise en page 1 19/03/07 15:31 Page 10

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tefal BR3031 - Quick Hot Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info