Bedienungsanleitung Tefal cb 7031 grill n pack contact (Seite 21 von 32) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

327966

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

Storage

Place the heating element (5) on the

reflector (7) then insert the control panel (6)

properly in its place.

Put the power supply cord (10) in the

compartment provided for this purpose

behind the control panel (6), and then store

it in the reflector (7).

Place the grill plate (4) on the appliance and

lock it in place using the two handles (3).

Put the protection lid (2) back in place by

extending it slightly, taking care to match up

the identical shapes in the hinge axis and

the hole in the lid (9).

* Depending on the model:

• Remove the appliance from the two

supports (*13) and fold up the storage

shelf (*12) as shown in the drawings

-> -> -> .

• Place the storage shelf (*12) upside down

on top of the appliance (opposite of ).

Close the protection lid (2): take hold of the

handle, lift the protection lid (2) and then pull

towards you.

Lock the protection lid in place (2) by closing

the two clips (1) (opposite of ).

The appliance may be stored vertically.

For U.K. users only :

If you have any problems or queries, please

contact our Customer Relations team on :

HELPLINE 0845 602 1454 – UK

(01) 4751947 – Ireland www.tefal.co.uk

This product has been designed for

domestic use only. Any commercial use,

inappropriate use or failure to comply with

the instructions, the manufacturer accepts

no responsibility and the guarantee will not

apply.

A/1

E/1E/2E/3E/4

Never put aluminium foil in the reflector.

Do not place cooking utensils to heat on the

appliance.

After use

Never leave the reflector in the water

between each use.

Set the thermostat to the min. position.

Unplug the appliance and let it cool down

before removing the grill plate (4), the

heating element (5) and the reflector (7).

Never close over the protection lid (2) if the

appliance is still hot.

The grill plate (4), the reflector (7), the base of

the appliance (8) and the protection lid (2)

can be cleaned with a sponge, hot water and

washing up liquid.

To remove the grill plate (4), unlock it from

the appliance using the handles (3).

To remove the protection lid (2):

• Take hold of the handle, lift the protection

lid (2) and then incline it towards you.

• When the identical shapes in the hinge

axis and the hole in the lid (9) are opposite

one another, the lid may be removed by

slightly extending the lid towards the

outside.

Do not use a metal scourer or scouring

powder.

To clean the grill plate (4), the sponge can be

replaced by a brush.

The heating element (5) does not need

cleaning.

If it is really dirty, rub with a dry cloth when

cold.

Never immerse the appliance in water with

its heating element and its cord.

Grill'n Pack plaque 11/05 24/11/05 15:02 Page 21

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tefal cb 7031 grill n pack contact Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info