18
GB
right as far as possible (fig. 3).
• To prepare your espresso, follow the same procedure as for the preparation of an
espresso with ground coffee.
With a Flexible Pod
• Before removing the water tank, remember to place the selector dial d1 in the "0"
position.
• Fill the tank with cold water and fit it back onto the appliance
(fig. 7 and 8).
• Switch on the appliance by pressing the ON/OFF button d2.
• The LED flashes during preheating, and once ready, it then remains lit.
• Fit the empty filter holder, and place the espresso cups underneath it. As soon as
the appliance has reached the right temperature, the orange LED stops flashing.
• Press the 2 cup or 1 cup button according to what you desire.
• Once the cup(s) are filled with hot water, move the selector dial back to the "0"
position
• Release the filter holder by pressing the "EJECT" button lightly and turning it
towards the left
(fig. 1). Place a soft pod into the filter holder. The pod is designed
to make one cup of coffee. The use of 2 pods on top of one another is not
recommended.
• Insert the filter holder into the appliance tightening it by turning it towards the
right
(fig. 3). The more it is compressed, the stronger the espresso will be.
• To prepare your espresso, follow the same procedure as for the preparation of an
espresso with ground coffee.
Your machine is also
compatible with soft
pods (generally 60
mm in diameter).
As this type of pod is
not specifically
designed for espresso
machines, you will
obtain a weaker
espresso than with an
E.S.E. pod.
7. PREPARING THE STEAM
The steam is used to froth the milk (for example when preparing cappuccinos or hot
chocolate) and heating water (for tea and other hot beverages).
• Turn the selector dial d1 to the position (fig. 13) (to obtain more steam, the
temperature needs to be higher than when making coffee).
• The ON/OFF button LED flashes again then remains lit. The appliance is then
ready for use.
• Place the liquid to be heated into a recipient. For best results, we recommend pou-
ring the liquid to be heated or frothed into a container with a narrow neck (a small
jug for example).
• Immerse the steam nozzle into the milk.
• Turn the selector dial d1 to the position (steam)
(fig. 14): the steam pours
into the milk.
• In order to obtain good frothy milk, we recommend using fresh cold milk.
•
Place your hand at the sides and bottom of the jug and use circular movements and
move from top to bottom. The pump operates intermittently, this is normal. (fig. 15).
• During operation, it is normal for the temperature light of the ON/OFF button to
light up and then turn off.
• When the liquid is hot and/or frothy, switch off the appliance (select dial d1 in
the"0" position).
•
When the selector dial d1 is in the "0" position, the appliance cools down automatically.
• During the cooling down phase, the LED of the ON/OFF button flashes, and hot water
runs into the drip tray.
• When the optimal temperature for preparing an espresso is reached, the LED remains lit.
