721815
193
Zoom out
Zoom in
Vorherige Seite
1/195
Nächste Seite
187187
ENEN
PROBLEMS CAUSES SOLUTIONS
The lid does not lock. The lid is incorrectly assembled.
Check that the seal is correctly
assembled on the seal holder and
that the seal holder is fully pushed
onto the lid in all places.
Excessive vibration.
The appliance is not positioned
on a flat surface, the appliance
is not stable.
Place the appliance on a flat surface.
Volume of ingredients too high.
Reduce the quantity of ingredients
processed.
Accessory error.
Check that you are using the
recommended accessory.
Leak through lid.
Volume of ingredients too high.
Reduce the quantity of ingredients
processed.
The lid is incorrectly positioned
or locked.
Lock the lid correctly on the bowl.
The lid seal is not present.
Position the seal on the seal holder
and clip the assembly to the lid.
The seal is cut or damaged.
Change the seal, contact an approved
service centre.
Accessory error.
Check that you are using the
recommended accessory.
Leak through the bowl
spindle.
The bowl seal is not correctly
positioned.
Position the seal correctly.
The bowl seal is damaged. Contact an approved service centre.
The locking ring (D5) is not
locked correctly.
Lock the ring correctly (D5).
The blades do not rotate
easily.
Pieces of food that are too big
or too hard are blocking it from
rotating.
Reduce the size or quantity of the
ingredients processed. Add some
liquid.
Smell from motor.
On using the appliance for the
first time, or in the event of
overload of the motor caused
by too large a quantity of
ingredients or by pieces that
are too hard or too big.
Allow the motor to cool down (about
30 minutes) and reduce the number
of ingredients in the bowl.
“STOP” is displayed.
The appliance has detected
too many vibrations and has
changed to the safety mode.
Check that you are using the right
speed and that you are using the
recommended accessory.
“SECU” is displayed.
Motor overload caused by too
many ingredients or pieces
which are too hard or too large
or overuse without sufficient
cooling down time.
Allow the motor to cool down (about
30 minutes) and reduce the number
of ingredients in the bowl.
193

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Tefal FE9001 - I-Companion wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info