Bedienungsanleitung Tefal Freemove FV9920 (Seite 10 von 122) (Alle Sprachen)

537719

Zoom out

Zoom in

Vorherige Seite

1/122

Nächste Seite

Storing your iron

• Set the thermostat control to “MIN”. Disconnect the base and empty the tank – fig.23.

• Wait for the soleplate to cool – fig.24. Wind the cord around the iron and its base – fig.25.

• Carry the iron and the base with two hands – fig.26 and 27.

PROBLEM CAUSES POSSIBLES SOLUTIONS

Brown streaks come

through the holes in

the soleplate and

stain the linen.

You are using chemical descaling

agents.

Do not add any descaling agents to the water in the

water tank.

You are not using the right type of

water.

Perform a self-cleaning operation and consult the

section “What water to use?”

Fabric fibres have accumulated in the

holes of the soleplate and are burning.

Perform the self-cleaning operation and clean the

soleplate with a damp sponge. Vacuum the holes of

the soleplate from time to time.

The soleplate is dirty

or brown and can

stain the linen.

You are ironing with an inappropriate setting

(temperature too high).

Clean the soleplate as indicated above.

Select the appropriate setting.

Your linen has not been rinsed sufficiently

or you are using starch.

Clean the soleplate as indicated above. Always spray

starch onto the reverse side of the fabric to be ironed.

Your iron is releasing little

or no variable/TURBO

steam.

The water tank is empty. Fill the water tank.

The anti-scale valve is dirty. Clean the anti-scale valve.

Your iron has a build-up of scale. Clean the anti-scale valve and carry out a selfclean.

Your iron has been used dry for too long. Carry out a self-clean.

Your iron needs recharging. For optimum efficiency, place the iron on its base to

be recharged at each resting period.

You are not using the the variable steam

trigger.

Hold the variable steam trigger down while you iron

to obtain a constant flow of steam.

The variable steam has not been

activated.

Gently shake the iron in a horizontal position, while

holding down the steam trigger until the steam

output begins.

The soleplate is

scratched or damaged.

You have placed your iron flat on a

metallic rest-plate or ironed over a zip.

You have cleaned your soleplate with an

abrasive or metal pad.

Always set your iron on its base. Try to avoid ironing

over zips. Refer to the chapter “Clean the soleplate”.

Your soleplate is

releasing particles.

Scale is building up on the soleplate. Carry out a self-clean operation.

Water is running out of

the water tank flap.

You have not closed the water tank flap

properly.

Check that the water tank flap is locked properly.

Water drips from the

holes in the soleplate.

You have stored the iron horizontally,

without emptying it and without setting

it to MIN.

See the section “Storing your iron”.

The red light on the

display panel flashes

when the iron is on the

base.

Connection problem between the iron

and the base.

Check that the iron is pushed back completely and

connected to the base.

The spray does not spray. There is not enough water in the water

tank.

Fill up the water tank.

The base moves on the

ironing board.

The base has not been properly

connected to the EasyFix system or the

EasyFix system is not properly fixed to

the ironing board.

Check that the base is properly connected to the

EasyFix system and that the EasyFix system is

securely screwed onto the board.

Your iron is cooling down. You are not placing it on its base

regularly.

Place the iron on the base during each resting period

while you change your item of clothing.

If there is a problem

If you have any problem or queries, please contact our Helpline:

0845 602 1454 – UK / (01) 677 4003 – ROI or consult our website – www.tefal.co.uk

TEFAL621-Freemove_1800122940_Mise en page 1 09/02/12 14:04 Page7

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tefal Freemove FV9920 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Tefal Freemove FV9920

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info