Bedienungsanleitung Tefal FV5356 Aquaspeed (Seite 8 von 90) (Alle Sprachen)

659504

Zoom out

Zoom in

Vorherige Seite

1/90

Nächste Seite

Vertical steam ironing

•

Hang the garment on a hanger and hold the fabric slightly taut with one hand. The steam is very hot,

so you should always do this with the garment on a hanger – never iron clothes which someone is

wearing.

• Set the thermostat control to

“MAX” – fig.8.

• Operate the Power zone trigger by pulsing – fig.7moving the iron from top to bottom – fig.9.

Dry ironing

• Set the temperature for the fabric to be ironed.

• Set the steam control to – fig.1.

• You may start ironing when the thermostat light goes out.

Extra Functions

Autoclean Catalys

Soleplate (depending on model)

• Your iron is equipped with a self-cleaning soleplate which works by catalysis.

• Its exclusive coating helps eliminate all the impurities generated by normal use.

• It is recommended that you always stand your iron on his heel to preserve its self-cleaning coating.

Integral anti-scale system

Your iron is equipped with an integral anti-scale system. This system will help to provide:

• a better ironing quality with a constant flow of steam,

• lasting performance from your appliance.

Auto-Stop safety feature (depending on model)

• The electronic system cuts off the electric power and the Auto-Stop warning light flashes if the

iron is left vertically on its heel for more than 8 minutes, or in a horizontal position for more than

30 seconds – fig.10.

• To restart the iron, just move it gently until the warning light stops flashing.

Anti-drip function (depending on model)

• When the iron is no longer hot enough to produce steam, the water feed will stop automatically to avoid dripping.

Maintenance and cleaning

Cleaning the anti-scale valve (once a month)

• Unplug your iron and empty the water tank.

• Adjust the steam setting to “Eco”.

• To remove the anti-scale valve, open the water tank lid and press the release button – fig.11 and then pull the valve upwards –

fig.12.

• Soak the valve in a cup of white spirit vinegar or plain lemon juice for 4 hours – fig.14.

• Rinse the valve under running water.

• Replace the anti-scale valve; press until it clicks in to place – fig.15.

Self-cleaning

• Fill the tank of your iron with untreated tap water. Stand the iron on it’s heel with the

thermostat set to “Max” and heat it up.

• When the thermostat light goes out, unplug the iron and hold it in a horizontal position,

over a sink. Remove the anti-scale valve – fig.11-12 (see previous chapter).

• Shake the iron gently, over the sink, until some of the water in the water tank (with the impurities) has flowed out through the

soleplate – fig.16.

• At the end of the operation, replace the anti-scale valve; press it in until it clicks – fig.15.

• Plug the iron back in and leave it resting on its heel for two minutes to dry the soleplate.

• Clean the soleplate with a damp, non-metallic cloth while it is still warm.

Cleaning the soleplate

Your steam iron is fitted with a self-cleaning soleplate (depending on model):

• The exclusive active coating helps eliminate all the impurities generated by the normal

day-to-day use of the iron.

• However, if you iron using an unsuitable programme, some traces may be left which require manual cleaning. In this case, it is

recommended that you use a soft damp cloth on the warm soleplate, in order not to damage the surface.

Your steam iron is fitted with an Ultraglide soleplate (depending on model):

• Clean the soleplate with a damp, non-metallic cloth while it is still warm.

Storing your iron

• Unplug the iron and wait for the soleplate to cool down – fig.18.

• Empty the water tank and set the steam control to . A little water may remain in the tank.

• Wind the cord around the heel at the back of the iron. Store the iron on its heel – fig.19.

Hold the iron a few centimetres

from the fabric to avoid burning

delicate fabrics. Every five pulses

return the iron to a horizontal po-

sition.

The auto-stop light will be lit du-

ring normal use!

Be careful! - Never touch the end of the

valve – fig.13.

- The iron will not function without the

anti-scale valve.

The self-cleaning function helps to slow

down scaling in your iron. In order to ex-

tend the life of your iron, use the Self-

Cleaning function once a month.

Attention! The use of a scouring pad will

cause damage to your soleplate's self-clea-

ning (depending on model) coating – fig.17.

Never use aggressive or

abrasive products.

1800129037 FV53XX EO A11 XS_110x154 10/06/13 16:09 Page4

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tefal FV5356 Aquaspeed Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info