Bedienungsanleitung Tefal FV9606 Steampower Ultimate Anti-Calc (Seite 8 von 114) (Alle Sprachen)

659498

Zoom out

Zoom in

Vorherige Seite

1/114

Nächste Seite

• If you are ironing a fabric comprising a mixture of fibres: adjust the temperature

to the most delicate fibre.

• If you put your thermostat in the “MIN” position, the iron does not become hot.

Using the water spray trigger (spray)

• When ironing with the steam or dry function, press the spray trigger several times

in succession to remove stubborn wrinkles –

fig.6.

Obtaining more steam

• Set the thermostat control to “MAX” or “•••”.

• Press the turbo steam button from time to time –

fig.7.

• To avoid water dripping onto your clothes, wait a few seconds before pressing again.

Smoothing garments vertically

• Hang the garment on a hanger and hold the fabric using one hand. The steam

is very hot so you should always do this with the garment on a hanger – never

while someone is wearing it.

• Set the thermostat control to “MAX” –

fig.8.

• Pulse the turbo steam button – fig.7 and move from top to bottom – fig.9.

Dry Iron function

• Adjust the temperature to the fabric being ironed.

• Set the steam control to –

fig.1.

• You can iron when the light goes out.

Additional functions

Gliss/Glide Protect

autoclean soleplate (depending on model)

• Your iron is equipped with a catalytic self-cleaning soleplate.

• Its exclusive coating permanently eliminates impurities generated during normal use.

• It is recommended that you always rest your iron on its support base to preserve its self-cleaning coating.

Auto-stop safety function (depending on model)

• The electronic system cuts the power and the auto-stop light flashes if the iron

is placed on its support base for more than 8 minutes or left flat for more than

30 seconds –

fig.10.

• To restart the iron, simply shake it gently until the light stops flashing.

Anti-drip function

• The automatic steam selection function is based on the fabric being ironed, which is integrated into your iron,

reduces the steam flow at low temperatures and prevents the iron from dripping onto your clothes.

Cleaning and maintenance

Descale your steam iron easily

• To prolong the steam performance, your iron is equipped with an integrated

limescale collector. This collector, which is located on the iron's support base,

automatically collects limescale that forms inside the iron.

• It is recommended that you clean the collector every 4 months. The amount of

scale collected will depend on the hardness of the water.

• BE CAREFUL: this operation should only be carried out when the iron has been

unplugged for more than one hour and has cooled down completely. To carry

out this operation, the steam iron must be close to a sink so that water can flow

from the tank when opened.

• Hold the iron in one hand and tilt it slightly, pointing the soleplate upwards.

Check that there is

water in the tank before

using the spray trigger.

Hold the iron a few

centimetres from the

fabric so as not to burn

delicate fabrics.

In normal use, the auto-

stop light is on!

Do not put any descaling

products (vinegar,

industrial descaling

agents...) to rinse out

your iron: they could

damage it.

1800128603_01_FV96XXE0_110x154 20/12/12 11:30 Page3

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tefal FV9606 Steampower Ultimate Anti-Calc Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info