Bedienungsanleitung Tefal HD5120 - Intense Aqua Control (Seite 9 von 63) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

725074

Zoom out

Zoom in

Vorherige Seite

1/63

Nächste Seite

OPERATING INSTRUCTIONS

This unit has 2 operation types (manual or automatic) and various additional functions.

• “ON/STANDBY”: On/Standby (off); Button A.

Press button (A) to turn the unit on or to put it on standby.

MANUAL FUNCTION

Setting the target humidity level and mist output rate

• Humidity level: Setting the target humidity level; Button C.

Choose the desired target humidity level by repeatedly pressing button C.

When SELECT appears, the humidity level that is displayed is the target rate that you have set:

between 40% and 75% relative humidity (RH) or "Co" for continuous operation (a safety shut-

down system will shut the unit down if the room humidity level exceeds 90% RH).

When "HOME" is visible without SELECT, the humidity level displayed is the humidity level of

the room at the level of the unit.

NOTE: This setting cannot be used in “Smart" modes.

WARNING: A very high humidity level in the room, in continuous operation mode, can affect the

air quality and can damage some objects. The recommended optimal humidity level is between

50% and 60% RH.

• Mist output speed - Setting the mist output speed; Button F.

Choose the desired mist output speed by repeatedly pressing button F. Three speeds are available.

NOTE: This setting cannot be used in “Smart" modes.

AUTOMATIC FUNCTION

Using the 3 pre-set operating modes

• SMART MODES: Selection of pre-set operating modes; Button E.

Choose one of three pre-set modes by repeatedly pressing button E.

AUTO mode: Automatic operation of the unit is pre-set to a target humidity level of 55% RH; the

unit automatically adjust the mist output rate according to the humidity of the room.

BABY mode: Automatic operation of the unit is pre-set to a target humidity level of 50 % RH; the

unit automatically adjust the mist output rate according to the humidity of the room. After 7

hours of operation the unit will stop automatically.

NOTE: Lights and beeps are disabled in this mode.

NIGHT mode: Automatic operation of the unit is pre-set to a target humidity level of 50% RH; the

unit will gradually reduce the mist output rate. After 8 hours of operation the unit will stop auto-

matically.

NOTE: Lights and beeps are disabled in this mode.

ADDITIONAL FUNCTIONS

• Timer: Programming the unit’s automatic shutdown; Button B.

Choose the desired number of hours of operation (from 1 to 9 hours) before the unit automati-

cally shuts down by repeatedly pressing button B.

NOTE: This function cannot be used in “Smart" modes.

• Heating function: Using the heating function; Button D.

Press button (D) to start or stop the “heating” function.

1800135179_02_HD-HU5120-15_HUMI_USER.qxp_1800135179/02 21/04/15 17:14 Page8

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tefal HD5120 - Intense Aqua Control Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info