Bedienungsanleitung Tefal K13304 (Seite 6 von 48) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch)

720888

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

Safety information

This appliance must be used only on the Tefal® 5 SECONDS Chopper 500ml.

This appliance should never be used by children or by people with a disability which

would prevent them from using it safely.

This appliance is not a toy. Keep it out of the reach of children.

Use the appliance on a stable and dry working surface.

Avoid lling in more than half the container. - g. B

Set the locking system when closing the bowl.

The high quality blades of the cutting rotor are extremely sharp. Be very careful to

protect your ngers when you use them. Gloves are recommended.

Always use the cutting rotors in the adapted container with the lid closed.

This appliance is conceived for solid ingredients.

Do not operate the appliance if:

- the container is empty

- the blades of the cutting rotor are damaged

- there is visible damage on the appliance or it is not functioning properly

- if the mechanism is blocked.

Always store the cutting rotors in their protective case, when you do not use the

appliance.

This product is designed for household use and not professional use.

If it is used for professional purposes, the warranty will be void and no liability will be

assumed.

Using

1. Remove all the parts from the box and clean them thoroughly by hand before using for

the rst time. Please refer to the instructions under «Cleaning» section.

2. Place the container on a stable and dry working surface.

3. Remove the cutting rotor from its protective case.

4. Place the cutting rotor in the container with the blades above one another to optimize

the space for the ingredients you want to chop. - g. C, D

5. Cut the big ingredients such as carrots or onions in a piece shorter than the length of

the blades so that they will not block the blades of the cutting rotor.

6. Then place them in the container while making sure that the cutting rotor will remain

straight.

7. Place the lid on the container making sure that the hexagon on the cutting rotor ts

into the recess in the lid.

8. Place one hand on top of the lid to hold the appliance down on the working surface.

Then use the other hand to grip the pull mechanism on the lid.

9. The rst pulling motion needs to be done with strength and speed. Execute this

motion always in an horizontal way.

10. Maintain your grip while the pulling mechanism retracts and do not let it go.

11. If the blades of the cutting rotor become blocked, do not force. Remove the cutting

rotor to carefully remove the ingredients and cut them in smaller pieces before putting

back the cutting rotor in the container taking care of the alignment of the blades to

CST-13-17-000497B MANUAL_CHOPPER 500 Use&care.indd 6 10/08/2018 10:06

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tefal K13304 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info