724257
37
Zoom out
Zoom in
Vorherige Seite
1/49
Nächste Seite
35
Before using for the first time, ensure that the protective cover has been removed from the blade.
2. Safety instructions
Read these instructions carefully before using your appliance for the first time: the manufacturer cannot be held
responsible for any use that does not comply with the instructions.
This appliance is not designed to be used by persons (including children) with impaired physical, sensorial or mental
capacities or persons with no experience or knowledge unless they have been provided with suitable instructions
concerning the use of the appliance from a person responsible for their safety. Children should be supervised to
ensure that they do not play with the appliance
This appliance complies with the technical regulations and standards in force.
It is designed to operate solely with an A.C. voltage. Prior to first use, please check that the supply voltage shown on
the rating plate of the appliance matches that of your electrical system.
Do not place or use this appliance on a hotplate or near an open flame (gas cooker).
Always use the product on a flat, stable, heat-resistant work surface, away from water splashes and any sources of
heat.
Do not turn it over.
Never remove the sealing cap before the blade has come to a complete stop.
Do not leave the appliance unattended when in use.
The appliance must be unplugged:
- before assembly or dismantling,
- if there is a problem or fault during operation,
- before cleaning or maintenance operations,
- after use.
Never pull on the supply cord to unplug the appliance.
Only use an extension cable after checking that it is in perfect condition.
A domestic appliance must not be used:
- if it has fallen or has been dropped,
- if the blade is damaged or incomplete.
In such cases, or for any other repair YOU MUST contact an approved Service Centre.
If the power cord has been damaged, it must be replaced by the manufacturer, an approved Service Centre or a
similarly qualified person in order to avoid any danger.
This product has been designed for domestic use only. Any commercial use, inappropriate use or failure to comply
with the instructions, the manufacturer accepts no responsibility and the guarantee will not apply.
1. Description
A
B
C
D
Motor unit
Sealing cap
Blade
Glass bowl
Warning: the blades are very
sharp, handle the blade with
care when using or cleaning
your appliance.
Do not run the appliance
empty.
3. Using the appliance
Before using for the first time, wash the bowl (D) and the sealing cap (B)
in hot water and washing-up liquid. Rinse and dry.
1 - Fit the blade (C) (fig. 1).
2 - Place the ingredients into the bowl (fig. 2).
3 - Fit the sealing cap (B) (fig. 2).
4 - Fit the motor unit (A) onto the sealing cap, press to start (fig. 3).
Notice RONDO_2550358-02:Notice RONDO SMART 23/09/09 14:45 Page 35
37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Tefal MB5021 - Rondo Smart wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info