Bedienungsanleitung Tefal PU4066 - Intense Pure Air (Seite 9 von 39) (Englisch)

724974

Zoom out

Zoom in

Vorherige Seite

1/39

Nächste Seite

Timer / delayed start

If the appliance is on: you can use this button to dene the operating duration. Briey press the button to select

the number of operating hours desired (1, 2, 4 or 8) and the appliance will automatically turn o at the end of the

selected period.

If the appliance is o: briey press the button to set the appliance to turn on in a certain number of hours (1, 2, 4 or 8).

3D pure air function (adjustable grid)

You can adjust the position of the air outlet grid manually, as desired. For an optimum, even ow of puried air in

the room, set the angle to 45°; for maximum comfort, set the angle to 90°.

Control Panel Lock

The lock system prevents the purier from being accidentally mis-set during operation.

To activate it, press the button (8) for 3 sec until the locked control panel indicator turns on. To exit this mode, press

the button (8) again for 3 seconds, until the indicator turns o. When selected, the other buttons are locked.

MAINTENANCE

Always switch the appliance o with the button (10) and unplug it before conducting any maintenance

operation.

You can clean the appliance with a slightly damp cloth.

IMPORTANT: Never use abrasive products which could damage your appliance’s appearance.

Filters

Filter Action Cycles

Pre-lter Clean Every 2 to 4 weeks

Active carbon lter Replace Every 12 months

True HEPA Allergy+ lter Replace Every 3 years

NanoCaptur lter Replace

Color changing

(see Color chart on lter)

This data is based on an average use of 8 hours per day at speed 2.

The recommended frequency for cleaning and replacing the lters may vary depending on the duration of use and

the operating environment.

- The light indicates when the pre-lter needs cleaning.

- The light indicates when the active carbon lter needs replacing.

- The light indicates when the TRUE HEPA ALLERGY+ FILTER needs replacing.

- The light indicates when the color of the NanoCaptur lter needs checking.

• The NanoCaptur lter contains translucent granules which change color according to the formaldehyde absorption

rate. Refer to the color chart on the inside of the panel or the lter itself to establish the lter saturation rate. Once the

saturation rate has reached its maximum, the lter must be replaced. You have to check the lter saturation rate every

six months.

• The pre-lter can be re-used: remove the dust using a vacuum cleaner or wash with water.

CAUTION:

The appliance’s efficiency can be reduced if the pre-filter is not cleaned regularly.

Never use a pre-filter that is still damp.

The pre-filter is the only filter which can be re-used and washed with water. The TRUE HEPA ALLERGY+ FILTER,

NanoCaptur and active carbon filters cannot be cleaned and re-used. Never wash with water.

To replace the lters, follow the instructions in the section “Disassembling/Reassembling lters” .

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tefal PU4066 - Intense Pure Air Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info