Bedienungsanleitung Tefal QB413H Masterchef Gourmet (Seite 8 von 184) (Alle Sprachen)

574497

Zoom out

Zoom in

Vorherige Seite

1/184

Nächste Seite

ACCESSORIES USED:

- Blender jug (D).

2.1 - ASSEMBLING THE ACCESSORIES

• Place the multi-function head (A3) in the horizontal position: press the button (A2) and manually lower the multi-

function head (A3) until it locks (the button (A2) returns to its initial position).

• Unlock the safety cover (A5) from the high-speed outlet (A4) by rotating it anti-clockwise and then remove it.

• Make sure that the appliance is switched off before locking the blender (D).

• Lock the blender jug (D) on the outlet (A4) by rotating it clockwise.

• Place the food in the blender jug, and lock the lid (D2) fitted with the measuring cap (D3), by rotating it anti-

clockwise.

2.2 - USAGE

• Start by turning the selector button (A1) to the desired position (from speed 4 to Max or pulse) according to the

recipe.

Use the "Pulse" position for better mixing control and for a better blending of your preparation.

You can add food through the hole in the measuring cap (D3) during preparation.

• To stop the appliance, turn the button (A1) to "0".

- Maximum time of use: 3 minutes.

Tips:

You can prepare:

- Finely blended soups, cream soups, stewed fruit, milkshakes and cocktails.

- Liquid batter (pancake, fritters, Yorkshire pudding, waffles, clafoutis and custard flans). If ingredients stick to the

sides of the bowl when mixing, stop the appliance and wait until the blades have stopped completely. Remove

the blender and push the food down onto the blades using a spatula, and put your blender back on the appliance

to continue processing.

• Never fill the blender jug with boiling liquid.

• Never run the blender jug empty.

• Always use the blender jug with its lid.

• Never remove the lid before the blades have stopped completely.

• Always pour liquid ingredients into the blender jug first before adding solid ingredients.

2.3 - DISMANTLING THE ACCESSORY

• Wait for the appliance to come to a complete stop before removing the blender by unlocking it in the anti-clockwise

direction and put back the cover (A5) by locking it on the outlet (A4) (clockwise).

3 - MINCING (DEPENDING ON MODEL)

ACCESSORIES USED:

- Attachment holder (E).

- Assembled mincer head (F).

3.1 - FITTING THE MINCER ATTACHMENT

• Press the button (A2) to release the multi-function head (A3) and raise it until it locks in place.

• Place the attachment (E) and lock it in the anti-clockwise direction such that the outlet is in alignment with the

appliance.

• Place the multi-function head (A3) in the horizontal position by pressing the button (A2) once again.

3.2 - ASSEMBLING THE MINCER HEAD

• Hold the body (F1) by the feed tube, with the wider opening uppermost.

• Insert the feed screw (F2) (long shaft first) into the body (F1).

• Fit the blade (F3) onto the short shaft protruding from the feed screw (F2) with the cutting edges facing outwards.

• Fit the chosen screen (F4 or F5) on the blade (F3), aligning the two lugs with the two notches in the body (F1).

• Screw the nut (F6) home on the body (F1) in the clockwise direction, without locking it.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tefal QB413H Masterchef Gourmet Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info