Bedienungsanleitung Tefal TW2253 - Micro Space (Seite 6 von 28) (Englisch)

723160

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

Fitting the elements on to the appliance

• Clip the end of the hose to the suction inlet - fig. 1.

• To remove it, unclip the end and pull - fig. 2.

• If your vacuum cleaner is equipped with the telescopic tube* (28): press the adjustment button, extend the length

of tube required and then release the button to lock it - fig. 3. Otherwise, assemble the tubes* (29) by turning

them slightly - fig. 4.

• Fit the required accessory on to the end of the tube:

- For rugs and carpets: use the multi-surface nozzle (23) in the retracted brush position - fig. 5, or the mini Turbo-

brush* (26).

- For parquets and smooth floors: use the multi-surface nozzle (23) in the extended brush position - fig. 6 or, for

best results, directly use the parquet nozzle* (25).

- For corners and hard-to-reach areas: use the crevice nozzle (22).

- For furniture and fragile surfaces: use the upholstery nozzle* (24).

Warning! Always switch off and unplug your vacuum cleaner before changing the accessories

Plugging in the power cord and switching on the appliance

• Unwind the power cord completely, plug in your vacuum cleaner - fig. 7 and press the ON/OFF pedal (13) - fig.

• Adjust the suction power:

- with the electronic power control* (14): turn the electronic control button* to adjust the suction power: towards

the max position for floors and to the min position for furniture and delicate fabrics - fig. 9.

- with the grip's manual power control: open the shutter of the adjustable slider to manually decrease the suction

power, e.g.: on fragile surfaces etc. - fig. 10.

Storing and transporting the appliance

• After use, switch off your vacuum cleaner by pressing the ON/OFF pedal (13) - fig. 8 - and unplug it - fig. 11.

• Rewind the power cord by pressing the power cord rewind pedal (15) - fig. 12.

• Place the crevice tool (22) in its storage compartment (21) behind the appliance.

• Place the multi-surface nozzle (23) in the self-standing position - fig. 13.

• Your vacuum cleaner can be easily moved thanks to its transport handle (1).

Important: Always switch off and unplug your vacuum cleaner before carrying out maintenance or cleaning.

Changing the bag

• The full bag warning light (12) indicates that the bag is full or saturated.

If you notice a reduction in the efficiency of your appliance, set the power at maximum and hold the nozzle above

the ground. If the full-bag warning light remains red, replace the bag.

• Remove the flexible pipe (27) from the suction inlet (11) - fig. 2.

• Open the lid (10) of your vacuum cleaner - fig.14.

a) If your vacuum cleaner is equipped with a paper bag*:

• remove the bag base (6) from the bag compartment (3) - fig. 15, and then remove the paper bag (7) from its

base (6) by sliding it on the runners - fig. 16;

• throw the paper bag in a dustbin - fig.17;

• put a new paper bag on the bag base - fig. 18, and then using the bag base runner (5), place it inside the com-

partment - fig. 19;

5. CLEANING AND MAINTENANCE

4. USE

* Model dependent: these parts are specific to certain models or they are accessories that can be purchased separately.

NC00903690-03_TW22_micro-space.qxp_NC00903690/03 21/06/2016 09:54 Page3

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tefal TW2253 - Micro Space Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info