11
EN
*According to model: these parts are specific to certain models or they are accessories that can be purchased separately.
It is easy to carry your vacuum cleaner using the handle (8).
Do not carry your appliance using the dust compartment handle (fig.12).
When storing your vacuum cleaner, place the tube in its storage compartment at the back of the appliance (fig.13).
You do not need to remove the accessory support (30) to store the accessory range (Fig.14).
The air we breathe contains particles that can be allergenic: larva and dust mite faeces, mould, pollen, smoke and animal
waste (hair, skin, saliva, urine), etc.
The finest particles can penetrate deep inside the respiratory system or can cause inflammation and affect the entire res-
piratory system.
(H)EPA ([High] Efficiency Particulate Air Filter) filters retain the finest particles.
Thanks to the (H)EPA filter, the air released into the room is cleaner than the air suctioned.
IMPORTANT: always switch off and unplug your vacuum cleaner before cleaning or servicing. Check and
clean your vacuum cleaner and the different filters regularly.
IMPORTANT: do not operate your vacuum cleaner without the filtration system fitted (foam,
microfilter and filter).
1 • Emptying the dust compartment (5)
After each use, empty the dust compartment as follows:
- Take the dust compartment by the handle and remove it (fig.15).
- Separate the fine dust compartment (5b) from the main compartment (5a) (Fig.16).
- Empty the main compartment over a dustbin (Fig.17) then empty the fine dust compartment (5b) (Fig.18).
- Clean the compartment seals using a cloth.
- Reposition the fine dust compartment on the main compartment (Fig.19) then put the dust compartment back
into place (fig.20).
IMPORTANT: do not use the vacuum cleaner once the maximum level (6) is reached on the dust compart
-
ment.
2 • Cleaning the black foam filter (18a)
IMPORTANT: clean the black foam filter every 6 months or when the suction is no longer satisfactory.
- Press the cover release button (fig.21). Tip the cover backwards (fig.22).
- Remove the black foam filter (fig.23) then wash and squeeze it (fig.24). Leave to dry for at least 12 hours before
refitting.
ATTENTION: let the black foam filter dry completely and make sure it is completely dry before placing it
back in the appliance.
- Reposition the black foam filter and close the cover.
3 • Cleaning the microfilter (18b)
IMPORTANT: clean the microfilter every 6 months.
- Press the cover release button (fig.21). Tip the cover backwards (fig.22).
- Remove the filtration cassette (18) then separate the black foam filter (18a) from the microfilter (18b) (fig.25).
- Wash the microfilter (fig.26). Leave to dry for at least 12 hours before refitting.
ATTENTION: let the microfilter dry completely and make sure that it is well dry before refitting on the ap
-
pliance.
- Reposition the black foam filter and close the cover.
ATTENTION: your appliance is equipped with a safety system (19) for detecting the filtration cassette: the
cover cannot be closed if the filtration cassette is not fitted (18a+18b).
The filtration cassette ref. RS-RT3732 (18a+18b) is available from shops or at Approved Service Centres.
IMPORTANT: if the appliance does not perform as normal after cleaning the black foam filter and microfilter
on your vacuum cleaner, clean the HEPA filter.
CLEANING AND MAINTENANCE
