Bedienungsanleitung Tefal TY8473 - Air Force (Seite 9 von 53) (Englisch)

723341

Zoom out

Zoom in

Vorherige Seite

1/53

Nächste Seite

In order to maintain the high performance level of your appliance, do not vacuum ultra-ne substances such as

plaster, cement or ashes, and clean the foam rubber motor protection lter at least once a month. If you perceive

that your vacuum cleaner is performing under regular average level, we recommend that you clean the foam

rubber motor protection lter more frequently.

• Remove the dust tray lid (9d) and then remove the foam rubber motor protection lter (9c) (g.21).

• Clean the foam rubber motor protection lter (9c) with warm, soapy water.

Rinse and let dry for at least 12 hours before replacing the lter on the appliance (g.22).

IMPORTANT: In order to assure optimal motor protection, make sure that the foam rubber lter is comple-

tely dry before replacing it on the appliance. You will need to let it dry for at least 12 hours before reinser-

ting it into the dust tray. An extra foam rubber motor protection lter is provided with your vacuum cleaner

so that you may use the appliance while the rst lter is still drying.

ATTENTION: Never place the dust tray components or the foam rubber motor protection lter in an auto-

matic dishwasher.

3. Vacuum cleaner care and maintenance

Wipe the main body of the appliance with a soft, damp cloth; then dry it with a dry cloth (g.23).

IMPORTANT: Do not use detergents, or aggressive or abrasive products. The transparent color of the dust

tray and/or of the separator lid may change with time; however, this will not modify the performance of

the appliance.

BATTERIES

1. Battery replacement

This appliance contains nickel-metal hydride (NiMh) accumulators which are, for safety reasons, only accessible

to professional engineers. When the battery is no longer capable of retaining its charge, the NiMh block must be

removed. In order to replace the accumulators, please visit the authorized Service Center nearest to your home.

2. Throwing away the appliance

It is important that you remove the batteries before throwing away your appliance. In order to do this, visit an

authorized Service Center or proceed as follows: disconnect the appliance from the electricity network, dismount

the neck from the main body removing the central screw, and then remove the ve (5) assembly screws located at

the back of the neck (g.24). Carefully lift the upper cover of the neck and unscrew the two electric circuit screws,

then unplug the battery block by pulling the plug (g.25). Do not throw the battery bloc into the waste bin; take

it to the authorized Tefal Service Center nearest to your home or to a place specially designated to process such

type of waste.

24 25

ENVIRONMENT

• According to current regulation, any appliance that is out of service must be taken to an authorized Service

Center, where it will be safely disposed of.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tefal TY8473 - Air Force Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info