723340
9
Zoom out
Zoom in
Vorherige Seite
1/53
Nächste Seite
6
EN
In order to maintain the high performance level of your appliance, do not vacuum ultra-ne substances such as
plaster, cement or ashes, and clean the foam rubber motor protection lter at least once a month. If you perceive
that your vacuum cleaner is performing under regular average level, we recommend that you clean the foam
rubber motor protection lter more frequently.
Remove the dust tray lid (9d) and then remove the foam rubber motor protection lter (9c) (g.21).
• Clean the foam rubber motor protection lter (9c) with warm, soapy water.
Rinse and let dry for at least 12 hours before replacing the lter on the appliance (g.22).
IMPORTANT: In order to assure optimal motor protection, make sure that the foam rubber lter is comple-
tely dry before replacing it on the appliance. You will need to let it dry for at least 12 hours before reinser-
ting it into the dust tray. An extra foam rubber motor protection lter is provided with your vacuum cleaner
so that you may use the appliance while the rst lter is still drying.
ATTENTION: Never place the dust tray components or the foam rubber motor protection lter in an auto-
matic dishwasher.
3. Vacuum cleaner care and maintenance
Wipe the main body of the appliance with a soft, damp cloth; then dry it with a dry cloth (g.23).
IMPORTANT: Do not use detergents, or aggressive or abrasive products. The transparent color of the dust
tray and/or of the separator lid may change with time; however, this will not modify the performance of
the appliance.
BATTERIES
1. Battery replacement
This appliance contains nickel-metal hydride (NiMh) accumulators which are, for safety reasons, only accessible
to professional engineers. When the battery is no longer capable of retaining its charge, the NiMh block must be
removed. In order to replace the accumulators, please visit the authorized Service Center nearest to your home.
2. Throwing away the appliance
It is important that you remove the batteries before throwing away your appliance. In order to do this, visit an
authorized Service Center or proceed as follows: disconnect the appliance from the electricity network, dismount
the neck from the main body removing the central screw, and then remove the ve (5) assembly screws located at
the back of the neck (g.24). Carefully lift the upper cover of the neck and unscrew the two electric circuit screws,
then unplug the battery block by pulling the plug (g.25). Do not throw the battery bloc into the waste bin; take
it to the authorized Tefal Service Center nearest to your home or to a place specially designated to process such
type of waste.
24 25
ENVIRONMENT
According to current regulation, any appliance that is out of service must be taken to an authorized Service
Center, where it will be safely disposed of.
9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Tefal TY8476 - Air Force Compact wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info