Bedienungsanleitung Teka DFI 46950 (Seite 28 von 41) (Englisch)

781226

Zoom out

Zoom in

Vorherige Seite

1/41

Nächste Seite

28/EN

Express Function

(Depends on model)

It shortens the time of the washing cycle

selected and decreases water consumption

by enabling washing under higher pressure.

Extra Dry Function

(Depends on model)

It provides superior drying performance.

Half Load function

(Depends on model)

It is used to operate the machine without

loading it completely.

1. Load your dishes in the machine as

you like.

2. Turn the machine on with On/Off key.

3. Select the desired programme and

press the Half Load key.

While the function is enabled, the Half

Load indicator will come on in the function

selection indicator and on the display.

4. Start the programme by pressing Start

/ Pause / Cancel key.

With the Half Load function you can

save both water and power while using

the lower and upper baskets of the

machine.

Tablet detergent function

(depends on model)

Allows to obtain a better drying

performance from the multi-purpose

detergents called as all in one detergents

such as 2in1, 3in1, 4in1, 5in1 and etc.,

depending on the hardness level of the tap

water.

If you have used the Tablet features

during the last washing programme

you used, Tablet function will remain

active in the next washing programme

you will select.

Tablet Detergent function may cause

change in the programme duration.

PowerWash Function

(Depends on model)

This function operates the lower impeller

with a higher pressure and higher speed to

enable a better washing for dishes such as

pans and trays with stubborn, dried soiling.

Auto Tablet Feature

(Depends on model)

Auto Tablet is a feature which detects

the use of combined tablet detergents

automatically.

Drying performance of these type of

detergents is improved by adjusting

temperature and duration accordingly.

Owing to this feature, there is no need

to press any button in case of a tablet

detergent use.

Feature can be activated if automatic

detection is desired.

To activate / to deactivate:

1. After turning on the machine, press

Time Delay and P keys simultaneously.

Keep them pressed until the

countdown 3, 2, 1 is completed on the

display.

2. Press P key to activate the a: option.

Automatic detergent detection feature

is disabled at “a:0” option and enabled

at “a:1” option. Set the desired option

by pressing the Time Delay key.

3. Turn off the machine with On/Off key to

save the changes.

IonClean function

(depends on the model)

IonClean function is enabled at regular

intervals and prevents the formation of

bad odours due to putrefaction. If this

function is selected, it will be activated

while the product is turned off and the

IonClean indicator on the panel will flash.

A ventilation noise can be heard, this

is normal. Until the function selection is

disabled, system is automatically activated

intermittently.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Teka DFI 46950 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Teka DFI 46950

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info