Bedienungsanleitung Teka DPL (Seite 12 von 76) (Deutsch, Englisch, Holländisch, Französisch, Portugiesisch, Spanisch, Polnisch, Türkisch)

781128

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

Program the working time

1)Switch on the cooker hood and choose the

required aspiration speed.

2)Push ‘Timer’.

3)Select the required programming time from

1 to 99 minutes by using the buttons ‘+’ and

‘-’.

4)The display will alternately show the clock

and the remaining programming time.

The maximum speed ‘H’ can only be

selected manually and will be changed

automatically to the second speed level after

approximately 10 minutes.

Display

On / Increase fan speed

Off / Reduce fan speed

Light

Timer

Instructions for use

You can activate or deactivate the cooker hood

by operating the functions shown in the diagram.

Switch on the extractor fan a few minutes before

you start to cook in order to ensure that a steady

air flow has been established before fumes

appear.

Allow the extractor fan to run for several minutes

after you have finished cooking (between 3 to 5

minutes) in order to expel all the grease from the

outlet duct. This prevents the return of grease,

smoke and smells.

Adjustment of the clock

1)Push the on/off’ button for 3 seconds.

2)Adjust the hour digits by pressing ‘+’ or ‘-’.

3)Push the on/off’ button again.

4)Adjust the minute digits by pressing ‘+’ or ‘-’.

5)After 3 seconds your settings are saved

automatically.

Filter saturation indicator “F”

1)When the sign ‘Saturation of the filters’ is

on, the filters should be cleaned.

2)After cleaning the filters, simultaneously

push “+” and “-” for at least 3 seconds

whereupon the sign will be switched off.

Changing light bulbs

For changing the light bulbs please contact the

manufacturer’s nearest Technical Service.

Cleaning the metal filters

During cleaning and maintenance

work, make sure the safety instructions

are complied with.

Cleaning and maintenance

•If your kitchen hood is made of stainless steel,

use proprietary cleaners mentioned in the

product instructions.

•If your kitchen hood is painted, use lukewarm

water and a neutral soap.

•Never use metallic scourers, nor abrasive or

corrosive products.

•Dry the kitchen hood using a cloth that does not

produce fibres.

•Do not use vapour cleaners

Cleaning the hood body

•To remove the filters from their fittings, press

lightly on the locks and then pull them off.

•The metal filters can be cleaned by soaking

them in hot water with neutral detergent until the

fat dissolves and then rinsing them under the tap

or using special anti-grease products. They can

also be washed in a dishwasher. In this case, it

is advisable to stack them vertically to avoid food

residues to stick to them.

•Cleaning in a dishwasher may damage the

metallic surface (blackening it), although this will

not affect its fat retention capacity.

•Once clean, leave them to dry off and then fit

them onto the kitchen hood.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Teka DPL Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info