30
CONVERSIONS
BURNER ARRANGEMENT ON THE HOT PLATE
FIG. 15
11) REPLACING THE INJECTORS
The burners can be adapted to different types of gas by
mounting injectors suited to the type of gas in question. To do
this, first remove the burner tops using a wrench "B". Now
unscrew injector "A" (see fig. 15) and fit a injector corresponding
to the utilized type of gas in its place.
It is advisable to strongly tighten the injector in place.
After the injectors have been replaced, the burners must
be regulated as explained in paragraphs 10. The technician
must reset any seals on the regulating or pre-regulating
devices and affix the label corresponding to the new gas
regulation on the appliance instead of the already existing
one. This label is supplied in the packet containing the
spare injectors.
The envelope with the injectors and the labels can be
included in the kit, or at disposal to the authorized
customer Service Centre.
For the sake of convenience, the nominal rate table also lists the
heat inputs of the burners, the diameter of the injectors and the
working pressures of the various types of gas.
BURNERS GAS NORMAL
PRESSURE
mbar
NORMAL
RATE INJECTOR
DIAMETER
1/100 mm
NOMINAL
HEAT IMPUT(W)
N°
DENOMINACIÓN
g/h l/h Min. Max.
1
ULTRA RAPID G30 - BUTANE
G31 - PROPANE
G20 - NATURAL
28 - 30
37
20 225
221 295 90
90
121 Y 1400
1400
1400 3100
3100
3100
2
RAPID G30 - BUTANE
G31 - PROPANE
G20 - NATURAL
28 - 30
37
20 204
200 267 83
83
117 S 800
800
800 2800
2800
2800
3
SEMIRAPID G30 - BUTANE
G31 - PROPANE
G20 - NATURAL
28 - 30
37
20 127
125 167 65
65
97 Z 500
500
500 1750
1750
1750
4
AUXILIARY G30 - BUTANE
G31 - PROPANE
G20 - NATURAL
28 - 30
37
20 73
71 95 50
50
72 X 400
400
400 1000
1000
1000
15
FISH G30 - BUTANE
G31 - PROPANE
G20 - NATURAL
28 - 30
37
20 204
200 267 83
83
117 S 1400
1400
1400 2800
2800
2800
TABLE
