Bedienungsanleitung Teka GKST 80 (Seite 25 von 92) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

77899

Zoom out

Zoom in

Vorherige Seite

1/92

Nächste Seite

Instructions for assembly

Instructi ons for assembly

Safety instructions for kitchen unit fitters

• Veneers, adhesives and plastic surfaces of surrounding

furniture must be temperature resistant (>75°C). If the veneers

and surfaces are not sufficiently heat resistant they can

become deformed.

• Ensure that all live connections are safely insulated when

installing the hob.

• Cover strips between the wall and the worktop behind the hob

which are made of solid wood are permissible as long as

minimum clearances in accordance with the installation

diagrams are maintained.

• Minimum clearances of the hob cut-out towards the rear are to

be maintained in accordance with the installation diagram.

• For installation directly next to a tall cupboard, a safety

distance of at least 40 mm must be ensured. The side surface

of the tall cupboard should be fitted with heat resistant

material. Due to working requirements, however, the distance

should be at least 300 mm.

• The clearance between the hob and an extraction hood must

be at least as large as that stipulated in the assembly

instructions for the cooker hood.

• The packaging materials (plastic foil, polystyrene, nails etc.)

must be kept out of reach of children as these parts are

potentially dangerous. Small parts can be swallowed and there

is a danger of plastic sheeting causing suffocation.

Ventilation

• The back wall of the bottom cabinet must be open in the area

of the cut-out in order to provide for air circulation.

• The front transverse strip of the unit must be removed so that

an air flow opening of at least 7 mm is created below the

worktop across the full width of the appliance.

• Remove any transverse strips underneath the worktop at least

in the area of the worktop cut-out.

• Clearence between the induction hob and kitchen furniture or

built-in units must provide for sufficient ventilation of the

induction hob.

• Avoid excessive thermal development from below e.g. from a

baking oven without a cross flow cooling device.

• The induction hob may not be used when pyrolysis operation

is taking place in a built-in oven.

Installation

Important

• If the cooking surface is located above furniture parts (side

panels, drawers, etc.), then an intermediate shelf must be

inserted at a minimum distance of 20 mm in order to prevent

accidental contact with the underside of the cooking surface.

The intermediate shelf may only be removed with tools.

• To avoid danger of fire, make sure that no combustible objects

which could easily catch fire or become deformed on exposure

to heat are placed directly next to or above the hob.

Sealing of the hob

Before installation, correctly insert the sealing unit delivered with

the hob.

• No liquids may penetrate between the edge of the hob and the

worktop or between the hob and the wall and come into

contact with any electrical appliances.

• When installing a hob into an uneven worktop, e.g. with a

ceramic or similar covering (tiles etc.), the seal on the hob is to

be removed and the seal between the hob and worktop made

with plastic sealing materials (putty).

•

The hob must under no circumstances be sealed with

silicone sealant!

This would make it impossible to remove the

hob at a later date without damaging it.

Working surface cut-out

Cut out the worktop recess accurately with a good, straight saw

blade or recessing machine. The cut edges should then be

sealed so that no moisture can penetrate.

The area is cut out as illustrated.

The glass ceramic hob must have a level and flush bearing. Any

distortion may lead to fracture of the glass panel.

Make sure that the sealing of the hob is properly seated.

The glass ceramic hob is fastened with clips or with brackets.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Teka GKST 80 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info