ENGLISH
3534
3 Close the door until it insert in the two
clips.
4 Lifting the door with both hands gripping the
sides, separate the oven door until it is
totally free from the hinges (B).
To re-assemble the door, proceed in reverse
order.
B
B
Caution
To change the bulb, first ensure that the oven
is disconnected from the mains supply.
• Unscrew the lens from the lampholder.
• Exchange the bulb and replace the lens.
The bulb substituted must be temperature
resistant to 300ºC. Order it from Technical
Assistance Service.
Changing the Oven Bulb
If Something Does not Work
The oven does not work
PROBLEM
Exchange the bulb.
Confirm its correct assembly in accordance
with the instruction manual.
Select a temperature.
Select a setting.
It should only light while the oven is heating
up to its set working temperature.
This is normal during its first use.
Periodically clean the oven.
Reduce the amount of grease
or oil added to the tray.
Do not use higher temperature settings
than those in the cooking tables.
SOLUTION
The inside light of the oven does not work
The heating indicator light does not work
Smoke is given off while the oven is working
Expected cooking results are not achieved
NB
If, despite these recommendations, the problem continues, contact our Technical Assistance
Service.
Check the connection to electrical circuit
Confirm the fuses and current limiter
of your installation.
Ensure the clock is in the manual
or programmed mode.
Check the position of the function
and temperature selectors
Review the cooking tables to obtain guidance on
the working of your oven.
