23
ENGLISH
5. When the cycle is finished, the oven will
turn itself off, an alarm will sound and
symbol will flash quickly.
6. Touch any sensor with your fingertip to stop
the alarm and to turn off symbol .
7. Turn the control dial to position .
8. Any traces of dirt and excess water can now
be removed with a damp cloth.
IMPORTANT
Do not open the oven door until the cleaning
programme has completely finished as the
cooling phase is necessary for it to work pro-
perly.
The cleaning programme should be done at a
low temperature. When it has finished, any
residue can be safely removed with a damp
cloth. Cooling times vary depending on the
room temperature. Before touching any inside
surface of the oven, check that it is cool.
How to use the tray-cleaning cycle
Teka
Hydroclean
®
enamel’s excellent proper-
ties mean that any traces of cooked food can
easily be removed from the trays. If stubborn
traces of cooked food remain after normal
cleaning, do the following:
1. Place the tray that needs cleaning on the
middle shelf support.
2. With the oven cold, slowly pour 250 ml of
water into the tray.
3. Select the Teka
Hydroclean
®
cleaning func-
tion.
IMPORTANT
Teka Hydroclean enamel has been designed to
be cleaned using the oven’s automatic
cleaning programme and other cleaning
methods can damage it. Anti-limescale
products in particular can seriously damage
the enamel’s properties.
Dishwasher detergent is not recommended for
washing Teka Hydroclean enamelled oven
trays. If deep cleaning is needed, use a gentle
detergent.
Some foods such as tomato, vinegar or salt-
cooked roasts, can make the enamel’s
surface appear to change; this is normal.
To clean the top of the oven,
• Wait until the oven is cold.
• Push the rod of the grill element (A) with
both hands until it is released from the
upper fastening point.
• Rotate the element and clean the top of the
oven.
• Finally, place the grill element back in its
original position.
Fold-down Grill Element
A
