Bedienungsanleitung Teka HLB 822P (Seite 27 von 76) (Deutsch, Englisch, Holländisch, Französisch, Portugiesisch, Spanisch)

780876

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

User’s Guide

English

OVEN TIMER OPERATION

Programming the Buzzer

1. Touch or until the symbol on the

display starts ﬂashing, then press . The

indication ‘00:00’ will appear on the display.

2. Select the time after which you want the

alarm to sound by pressing or . You

will hear 2 beeps to conﬁrm that the time has

been set and the clock will start counting

down from the selected time. The sym-

bol will ﬂash slowly.

3. Once the time has expired, an acoustic sig-

nal will sound for 90 seconds and the

symbol will ﬂash quickly.

NOTE

With the Buzzer function, the oven will not

turn off when the time expires.

4. Touch any key to stop the alarm. The

symbol will then disappear.

If you wish to modify the time on the buzzer, re-

peat the steps shown. Upon entering the timer

control, the time currently remaining will appear,

which you will be able to adjust.

NOTE

With the Buzzer function, the remaining time

will show permanently on the display. With

this programmed function, it is not possible

to view the time or the total programmed

cooking time.

Programming Cooking Time

1. Touch or until the symbol on the

display starts ﬂashing, then press . The

indication ‘00:00’ will appear on the display.

2. Select the time after which you want the

alarm to sound by pressing or . You

will hear 2 beeps to conﬁrm that the time has

been set and the clock will start counting

down from the selected time.The sym-

bol will ﬂash slowly.

3. Select a function and a cooking temperature

using the oven commands.

4. Once the cooking time is up, the oven will

turn off, an alarm will sound and the

symbol will ﬂash quickly.

5. Touch any key to stop the alarm and turn off

the symbol. The oven will switch on again.

6. Set the controls to the position to turn off

the oven.

You can change the remaining cooking time at

any time by touching or until the

symbol starts to ﬂash quickly. Now press to

change the time.

NOTE

With the Cooking Time function, the remain-

ing time will show permanently on the dis-

play. You cannot see the current time on the

display when this function is set.

Programming the Cooking Stop Time

1. Touch or until the symbol on the

display starts to ﬂash and press . You will

see the current time on the timer display.

2. Select the time after which you want the

alarm to sound by pressing or . You

will hear 2 beeps to conﬁrm that the time has

been set and the clock will start counting

down from the selected time. The sym-

bol will ﬂash slowly.

3. Select a cooking function and temperature.

4. When the cycle is ﬁnished, the oven will turn

itself off, a buzzer will sound and symbol

will ﬂash quickly.

5. Touch any sensor to stop the alarm and to

turn off the , symbol. The oven will switch

on again.

6. Set the controls to the position to turn off

the oven.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Teka HLB 822P Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info