Bedienungsanleitung Teka IT 612 (Seite 15 von 25) (Deutsch, Englisch, Französisch)

781078

Zoom out

Zoom in

Vorherige Seite

1/25

Nächste Seite

level until reaching the maximum value of

P. Using the sensor (4), you can redu-

ce the power level.

For a fast powering up at maximum power:

with the plate at 0, touch the sensor (4)

once. The plate will directly activate at

level 9.

By continuing to press down on any of

these two sensors (4) or (5), they

will repeat the action every half a second,

without needing to press consecutively.

SWITCHING THE HOTPLATES OFF

With the sensor (4), lower the power to

level 0.

The hotplate will automatically power off.

For a fast power up: no matter what the

power level, by simultaneously pressing

the sensors and (5/4), the plate will

immediately power off.

By powering off a hotplate, an Hwill be

shown on the power indicator, if the glass

surface is at a high temperature, indicating

that there a risk of burning. When the tem-

perature has fallen, the indicator will power

off if the top is disconnected or, if it is tur-

ned on, it will indicate a 0.

POWERING OFF THE DEVICE

At any time, you can disconnect the top by

pressing the sensor (1). When doing

this, an acoustic signal is heard and the

power indicators (3) will turn off, except if

there is a residual Hheat indicator active

due to the plate temperature.

Locking the sensors

Using the locking sensor (8), you can

block all the sensors on the touch control

panel. This will make it possible to avoid

undesired accidental operations occurring

or children being able to manipulate the

control.

Bear in mind that with the touch control

powered up, the on/off sensor (1)

makes it possible to turn it off even if the

locking is activated (pilot 10 on). On the

other hand, if the touch control is turned

on, the locking function does not allow for

activating the on/off sensor (1). You

should first deactivate blocking.

To activate or deactivate the function,

simply keep pressing the sensor (8)

for about 1 second. When the function is

active, the pilot light (10) turns on.

Detecting pans

(induction hotplates)

The induction cooking plates incorporate a

container detector. This is to avoid the

plate operating without having a pan on

top or when the container is unsuitable,

e.g., if made of aluminium or another non-

metallic material.

The power indicator blinks if, with the plate

turned on, no container or an inappropria-

te container is detected.

If the containers are removed from the hot-

plate while operating, this will automati-

cally cut off the power supply and the

power indicator will blinks. When putting

the container on the cooking hotplate

again, the power supply restarts at the

power level that was selected.

The time for detecting the container is 3

minutes. If three minutes go by without

having placed a container on the hotplate

or if an inappropriate container is placed

there, the cooking plate deactivates.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Teka IT 612 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info