Bedienungsanleitung Teka TKD1480 (Seite 12 von 48) (Englisch, Spanisch)

781278

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

P.22 P.23

Before your maintenance starts, please do pull out the power plug or disconnect power

and close the tap.

- Solvents are forbidden to avoid that the washing machine is damaged, and toxic gases

are generated or exploded.

- Never use water to sprinkle and wash the washing machine.

- It is forbidden that the detergents containing PCMX are used to clean the washing machine.

Cleaning and Maintenance of Washing Machine Cabinet

Proper maintenance on the washing machine can extend its working life. The surface can

be cleaned with diluted non-abrasive neutral detergents when necessary. If there is any

water overflow, use the wet cloth to wipe it off immediately. No sharp items are allowed to

strike the cabinet.

Notes: formic acid and its diluted solvents or equivalent are forbidden.

Clean Internal Drum

The rusts left inside the drum by the metal articles shall be removed immediately with

chlorine-free detergents.

Never use steel wool.

Dispose a Frozen Washing Machine

When the temperature drops below zero and your washing machine gets frozen, you may:

1.Disconnect the power supply for the washing machine.

2.Wash the tap with warm water to loosen inlet pipe.

3.Take down inlet pipe and immerse it in warm water.

4.Pour warm water into washing drum and wait for 10 minutes.

5.Reconnect inlet pipe to the tap and check whether inlet and outlet are working normally.

Notes: when the washing machine is reused, make sure the ambient temperature is above 0 C

Anti-freeze

If your washing machine is located in the room where it can get frozen easily, please drain

the remaining water inside drain pipe and inlet pipe thoroughly.

Remove the remaining water in inlet pipe:

1.Close the tap.

2.Screw off the inlet pipe from tap and put its end into the container.

3.Start up any procedure except single Wash or Drain

procedure. Water will be drained out of inlet pipe if any

for about 40 seconds.

4.Reconnect the inlet pipe to tap.

Remove the remaining water in drain pump

To avoid burning, it shall be done after the hot water

inside the machine cools down.

Maintenance

Table of Washing Procedures

Operate Washing Machine

The energy class is A+++ Energy test program: Cotton ECO 60/40℃, Speed: the highest speed; Other as the default.

Notes: The parameters in this table are only for user's reference. The actual parameters maybe different with the parameters in above mentioned table.

“Cotton ECO 60/40℃ ” are the “standard Cotton 60/40℃” programme and the standard washing programs to which the information in the label

and the fiche relates, and they are suitable to clean normally soiled cotton laundry and that they are the most efficient programmes in terms

of combined energy and water consumptions for washing that type of cotton laundry,that the actual water temperature may differ from the

declared cycle temperature.

Load(kg) Detergent Box

Procedure

Description

Cotton

Softener

Case

1400