Bedienungsanleitung Telefunken C32F545A (Seite 61 von 148) (Deutsch, Englisch, Französisch, Italienisch)

732905

Zoom out

Zoom in

Vorherige Seite

1/148

Nächste Seite

English - 25 -

• The location where the transmission is most effective

differs depending on the usage environment.

• The Wireless feature of the TV supports 802.11 a,b,g

& n type modems. It is highly recommended that

you should use the IEEE 802.11n communication

protocol in order to avoid any possible problems

while watching videos.

• You must change your modem’s SSID when there

are any other modems around with the same SSID.

You can encounter connection problems otherwise.

Use a wired connection if you experience problems

with a wireless connection.

Configuring Wireless Device Settings

Open the Network menu and select Network Type as

Wireless Device to start connection process.

Highlight Scan Wireless Networks option and press

OK to start a search for available wireless networks.

All found networks will be listed. Highlight your desired

network from the list and press OK to connect.

Note: If the modem supports N mode, you should set N

mode settings.

If the selected network is password-protected, enter

the correct key by using the virtual keyboard. You can

use this keyboard via the directional buttons and the

OK button on the remote control.

Wait until the IP address is shown on the screen.

This means that the connection is now established.

To disconnect from a wireless network, highlight

Network Type and press Left or Right buttons to set

as Disabled.

If your router has WPS, you can directly connect to the

modem/router without entering a password or adding

the network first. Highlight Press WPS on your wifi

router option and press OK. Go to your modem/router

device and press the WPS button on it to make the

connection. You will see a connection confirmation on

your TV once the devices have paired. Select OK to

proceed. No further configuration is required.

Highlight Internet Speed Test and press the OK button

to check your internet connection speed. Highlight

Advanced Settings and press the OK button to

open the advanced setting menu. Use directional and

numeric buttons to set. Highlight Save and press the

OK button to save settings when complete.

Other Information

The status of the connection will be displayed as

Connected or Not Connected and the current IP

address, if a connection is established.

Connecting to your mobile device via WLAN

• If your mobile device has WLAN feature, you can

connect it to your TV via a router, in order to access

the content in your device. For this, your mobile

device must have an appropriate sharing software.

Connect your TV to your router following the steps

mentioned in the sections above.

Afterwards, connect your mobile device to the router

and then activate the sharing software on your mobile

device. Then, select files that you want to share with

your TV.

If the connection is established correctly, you will

be able to access the shared files installed on your

mobile device via the AVS(audio video sharing)

feature of your TV.

Highlight the AVS option in the Sources menu and

press OK, available media server devices in the

network will be displayed. Select your mobile device

and press the OK button to continue.

• If available, you can download a virtual remote

controller application from the server of your mobile

device application provider.

Note: This feature may not be supported on all mobile

devices.

Wake ON

Wake-on-LAN (WoL) and Wake-on-Wireless LAN

(WoWLAN) are standards that allow a device to be

turned on or woken up by a network message. The

message is sent to the device by a program executed

on a remote device connected to the same local area

network, such as a smartphone.

Your TV is WoL and WoWLAN compatible. This feature

might be disabled during the First Time Installation

process. To enable this feature set the Wake On option

in the Network menu as On. It is necessary that both

the device, from which the network message will be

sent to the TV, and the TV are connected to the same

network. Wake On feature is only supported for Android

OS devices and can only be used via YouTube and

Netflix applications.

In order to use this feature the TV and the remote

device should be connected at least once while the

TV is on. If the TV is powered off, the connection

should be re-established, the next time it is switched

on. Otherwise this feature will be unavailable. This

does not apply, when the TV is switched into the

standby mode.

The performance of some devices in the market, may

vary due to the software architecture. In order to use

Wake On feature with a better performance, please

make sure that your device has latest firmware version.

If you want your TV to consume less power in standby

mode, you can disable this feature by setting the Wake

On option as Off.

Wireless Display

Wireless Display is a standard for streaming video and

sound content. This feature provides the ability to use

your TV as wireless display device.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Telefunken C32F545A Seite 61

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info