Bedienungsanleitung Telefunken D48F275A3C (Seite 43 von 77) (Deutsch, Englisch, Französisch)

583386

Zoom out

Zoom in

Vorherige Seite

1/77

Nächste Seite

English - 42 -

icon state by pressing the red button again. You can

toggle between the red button icon mode and full

UI mode of the application via pressing red button.

It should be noted that the red button switching

capability is provided by the application and some

application may behave differently.

If you switch to another channel while an HbbTV

application is active (either in red button icon mode

or full UI mode), the following scenarios can occur.

•The application can continue running.

•The application can be terminated.

•The application can be terminated and another

autostart red button application can be launched.

HbbTV allows the applications to be retrieved both

from broadband or broadcast. The broadcaster

may enable both ways or one of them. If the

platfrom does not have an operational broadband

connection, the platform can still launch applications

transmitted on broadcast.

The autostart red button applications generally

provide links to other applications. An example of

this is shown below. The user then can switch to

other applications by using the links provided. The

applications should provide a way to terminate

themselves, usually button 0 is used for this.

Figure a: ARD start bar application

Figure b: ARD EPG application, broadcast video

is shown on the left bottom, can be terminated by

pressing 0.

HbbTV applications use keys on the remote

control to interact with the user. When an HbbTV

applications is launched, the control of some

keys are owned by the application. For example,

numeric channel selection may not work on a

teletect application where the numbers indicate

teletext pages.

HbbTV requires AV streaming capability for the

platform. There are numerous applications providing

VOD (video on demand) and catch-up TV services.

The user can use play, pause, stop, forward, and

rewind keys on the remote control to interact with

the AV content.

Software Upgrade

YourTViscapableofndingandupdatingautomatically

via the Aerial/Cable/Satellite signal.

Software upgrade search via user interface

Simply navigate on your main menu. Choose Settings

and select Other Settings menu. In Other Settings

menu navigate on to the Software for Upgrade item

and press OK button. In Upgrade Options menu

select Scan for upgrade and press OK button to

check for a new software upgrade.

If a new upgrade is found, it starts to download

the upgrade. Press OK to continue with the reboot

operation.

3 AM search and upgrade mode

While the TV is connected to an aerial signal. If

Automatic scanning in the Upgrade Options menu

is Enabled, the TV wakes up at 03:00 and searches

broadcast channels for new software upgrades. If

new software is found and downloaded successfully,

the next time the TV powers up, it will have the new

software version.

Note: If the TV fails to come on after the upgrade unplug the

TV for 2 minutes and plug in again.

Troubleshooting & Tips

Tv will not turn on

Make sure the power cord is plugged in securely to

wall outlet. The batteries in the remote control may be

exhausted. Press the Power button on the TV.

Poor picture

• Have you selected the correct TV system?

• Low signal level can cause picture distortion.Please

check antenna access.

• Check if you have entered the correct channel

frequency if you have done manual tuning.

• The picture quality may degrade when two devices

are connected to the TV at the same time. In such

a case, disconnect one of the devices.

No picture

•No Picture means that your TV is not receiving a

transmission. Have you selected the correct button on

the remote control? Try once more. Also make sure

the correct input source has been selected.

•Is the antenna connected properly?

•Is the antenna cable damaged?

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Telefunken D48F275A3C Seite 43

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info