Bedienungsanleitung Telefunken DPF 9332 (Seite 9 von 113) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

486499

Zoom out

Zoom in

Vorherige Seite

1/113

Nächste Seite

Non contractual document subject to change in case of typographical errors (Mktg0810) COPYRIGHT SOPEG 2010

The manufacturer reserves the right to modify the product specifications without notice.

ENGLISH

2. Press ▼ to select the internal memory or removable media.

3. Press ◄/► to select Photo mode and press ENTER.

4. Press COPY/DEL. The screen will display COPY/DELETE/SORT. Press ◄/► to select SORT

and press ENTER.

5. Press ▼ to select 6 PIC, 12 PIC or 30 PIC to display 6, 12 or 30 thumbnails and press ENTER

to confirm.

IV. WI-FI

To enjoy the provided web services, such as Picasa™, Flickr

from the photo frame, you need to sign

up for a new account for the web service you want to use on the Internet. Before first time using the Wi-

Fi function of the photo frame, follow the steps below to set up the Wi-Fi

connection and make the

required account configurations, so that you can use the available web services in Wi-Fi List.

1. Wi-Fi Setup

Press EXIT on your remote as many times as necessary for the media selection screen to come up.

Press ◄/► to select Wi-Fi and press ENTER.

Press ► to highlight Wi-Fi Setup and press ENTER to enter the submenu.

Navigate with ▲/▼ in the Wi-Fi Setup submenu.

1.1 If you are using automatic IP network

- Select DHCP for automatic connection in the Wi-Fi Setup submenu.

- The Select Access Point screen appears and shows access points that are available nearby.

- Use the ▲/▼ to select an access point you want to connect to, and then press ENTER.

1. After successful connection to an open access point with no password (security-disabled

network) “Your Connection is successful” will be displayed.

2. To connect to a password-protected access point (security-enabled network), you will be

prompted to enter the password in the Keyboard screen that appears.

Enter the password in the Key field. When finished, select Done, and then press ENTER.

After entering the correct password “Your Connection is successful” will be displayed.

If you enter a wrong password “Connection failure Please try again ” will be displayed.

- Once the connection is established, the icon

will be flashing in the top right corner of the

screen. The IP address, Gateway, DNS server and MAC address will be shown at the bottom

of the screen.

- When you have set up Wi-Fi

connection using DHCP, the photo frame will connect to the

Wi-Fi network automatically every time it is powered on.

Tips: On-screen keyboard use

- Press the ◄/►/▲/▼ to select an item, press ENTER to confirm.

- Select shift and press ENTER to toggle between uppercase and lowercase.

- Select Backspace and press ENTER to cancel your input.

- Select space and press ENTER to input a space.

- To go to the next field or move among fields, select Done and then press ENTER.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Telefunken DPF 9332 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info