Bedienungsanleitung Telefunken L32H249A3CW (Seite 7 von 24) (Englisch)

598348

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

English - 33 -

Switching On/Off

To Switch the TV On

Connect the power cord to the 220-240V AC, 50 Hz.

To switch on the TV from standby mode either:

Press the “ ” button, P+ / P- or a numeric button on

the remote control.

Press the side function switch until the TV comes on

from standby.

To Switch the TV Off

Press the “ ” button on the remote control or press

the side function switch until the TV switches into

standby mode.

To power down the TV completely, unplug the

power cord from the mains socket.

Note: When the TV is switched to standby mode, the standby

LED can blink to indicate that features such as Standby Search,

Over Air Download or Timer is active. The LED can also blink

when you switch on the TV from standby mode.

First Time Installation

When turned on for the first time, the language

selection screen is displayed. Select the desired

language and press OK.

On the next screen, set your preferences using the

navigationbuttonsandwhennished, pressOK to

continue.

Note: Depending on the Country selection you may

be asked to set and conrm a PIN at this point. The

selected PIN cannot be 0000. You have to enter it if you

are asked to enter a PIN for any menu operation later.

You can activate Store Mode option at this point.

This option is intended only for store use. It is

recommended to select Home Mode for home use.

If Store Modeisselected,aconrmationscreenwill

be displayed. Select YES to proceed. This option

will be available in Other Settings menu and can be

turned off/on later.

If Home Mode is selected, Store Mode will not be

available after the First Time Installation. Press OK

button to continue.

Aerial Installation

If you select Aerial option from the search type selection

screen, the television will search for digital terrestrial TV

broadcasts. After all the available stations are stored,

the Channel List will be displayed on the screen.

While the search continues a message will appear,

asking whether you want to sort channels according

to the LCN(*). Select Yes and press OK toconrm.

(*) LCN is the Logical Channel Number system that

organizes available broadcasts in accordance with a

recognizable channel sequence (if available).

Press MENU button to quit channel list and watch TV.

Cable Installation

If you select Cable option and press OK button on

the remote control a confirmation screen will be

displayed. Select YES and press OK to proceed.

To cancel operation, select NO and press OK. You

can select frequency ranges from next screen. Enter

the frequency range manually by using the numeric

buttons. When nished, press OK button to start

automatic search.

Note: Searching duration will change depending on

the selected search step.

Satellite Installation

If you select Satellite option from the search

type selection screen, you can set a satellite and

watch satellite channels. When you select Satellite

installation, Antenna Type menu will be displayed.

You can select Antenna type as Direct, Unicable

or DiSEqC switch.

Direct: If you have a single receiver and a direct

satellite dish, select this antenna type. After selecting

Direct, another menu screen will be displayed. Select

an available satellite and press OK to scan for services.

Unicable: If you have multiple receivers and a

unicable system, select this antenna type. Press OK to

continue.Conguresettingsbyfollowinginstructions

on the screen. Press OK to scan for services.

DiSEqC switch: If you have multiple satellite dishes

and a DiSEqC switch, select this antenna type. After

selecting DiSEqC switch, another menu screen will

be displayed. You can set four DiSEqC options (if

available). Press GREEN button to scan all satellites

or press YELLOW button to scan only the highlighted

satellite. To save and exit press OK button.

Note: Do not turn off the TV while initializing rst time

installation.

(*) Some options may not be available depending on

the country selection.

Getting Started

First Time Installation - USB Connections

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Telefunken L32H249A3CW Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Telefunken L32H249A3CW

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info