Bedienungsanleitung Telefunken TCD62 (Seite 3 von 8) (Englisch)

486599

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

NOTE: Old batteries may swell and leak. To avoid damage to your instrument,

remove the batteries when the unit is to be stored for long periods of

time or if the batteries become exhausted.

NOTE: To use your set on battery power, you MUST remove the AC cord from

both the wall outlet and the back of the set.

AC OPERATION

Plug the AC power cord into AC socket (37), and the other end of the cord into

the standard household outlet. Please make sure the MAIN POWER SWITCH (53)

must be switched to ON position, and then press POWER BUTTON (4) or (46) to

turn on the unit.

NOTE : For dual voltage version, make sure that the AC Voltage Selector (38) is

switched to your local voltage (optional).

NOTE : Switch the MAIN POWER SWITCH (53) to OFF position when the unit is

not to be used for a long period of time.

TO PLAY THE RADIO

➊ Press the Radio Button (11) OR (47) to set the radio on (the Radio Indicator

(10) will illuminate).

➋ Select desired wave band with the Band button (18) OR (48).

➌ Tune to desired station by press CD FORWARD/BACKWARD

SKIP/SEARCH/RADIO TUNING UP/DOWN BUTTONS (21) OR (44)/(52).

Each time the button is pressed, the frequency changes.

➍ To search for a station quickly, keep the CD FORWARD/BACKWARD

SKIP/SEARCH/RADIO TUNING UP/DOWN BUTTONS (21) OR (44)/(52) until

the station starts to change rapidly, then release the button and it will stop at

the next strong station.

➎ The built-in AM(MW) antenna and the antenna rod are directional. When

receiving FM broadcast, extend the Telescopic Antenna (32) in full length. The

strongest reception can be achieved by rotating the set for AM(MW) or

Telescopic Antenna for FM.

➏ Adjust the VOLUME UP/DOWN CONTROL (16) OR (51) to your listening

preference.

➐ To turn off the radio, press power on/off button.

PRESETTING STATIONS

UP TO 10 AM(MW) AND 10 FM STATIONS CAN BE STORED INTO THE

PRESET MEMORIES.

➊ Press the Radio Button (11) OR (47) first, the Radio indicator (10) will

illuminate.

➋ Press the Band Switch to select AM(MW) or FM band, and press the Tuning

Down or Up Button to select a station.

➌ Press the Program Button, "

" will be flashing in the Display.

➍ While "

" is flashing, press the Radio Preset Button (1) (once or

repeatedly) to choose a memory location.

➎ Press the Program Button again to confirm. The station now broadcasting is

stored into that preset memory.

➏ Repeat the above steps 2 to 5 to store other 9 stations into memory.

Each memory location (01-10) can store 2 stations, one for AM(MW), the other for

FM.

TO LISTEN TO PRESET MEMORY STATIONS (after you have programmed them)

➊ Press the Radio Button (11) OR (47) to set the radio ON.

➋ Press the Band Button (18) OR (48) to select your desired wave band.

➌ Press the Radio Preset Button (1) to select the memory location (01-10). You

will receive the station you stored into that preset memory. Pressing the button

several times will give you the different memory locations 1-10 where your

desired stations were stored into the preset memories 1 to 10 (Example:

Pressing the button 3 times will give you Preset Number 3, pressing the button

4 times will give you Preset Number 4). Word "

“ and Preset Number

will be shown in the Display.

➍ To shut off the radio, press the Power On/Off Button (4) OR (46) again.

CASSETTE OPERATION

☛ FAST FORWARD (25) AND REWIND (24)

For fast forward or rewinding of the tape, press the Cassette Fast Forward

Button or Cassette Rewind Button.

☛ PAUSE (28)

The Cassette Pause Button is used to edit commercials or in case recording is

temporarily interrupted. Since the deck motor is still running while the pause

key is pressed, this pause feature should be used for a short time only.

☛ AUTOMATIC STOP

This instrument has a built-in automatic stop function and the tape mechanism

will stop playing or recording and shut off when it reaches the end of the tape.

☛ MANUAL STOP (27)

The tape player can be stopped manually by pressing the Cassette Stop/Eject

Button (27).

CASSETTES

CASSETTE TAPE SELECTION

Low quality tapes tend to break and stretch and a broken tape can easily become

entangled in the drive mechanism, causing major damage. Stretched tapes will

run at uneven speeds and will distort anything recorded on them.

☛ Use only quality brands of tapes.

☛ Use of C-120 (120 minutes) cassette is not recommended. The extreme

thinness of this tape may result in breakage or other failures.

☛ This unit is not designed for CrO2, Fe-Cr or METAL tape use. Therefore, be

sure to use name brand normal cassette tapes.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Telefunken TCD62 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info