Bedienungsanleitung Telefunken TNE 1302 (Seite 9 von 22) (Englisch)

486541

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

- 8 -

Control the Loudness

This unit has loudness function, it can automatically increase the bass sound effect at low volume (the higher volume,

the smaller bass increase), which improves the output sound. You only need to press the loudness button (LOUDNESS)

to obtain the loudness function when it is playing, LOUDNESS will be displayed on the VFD.

Changing the VFD Darkness

This unit has set several settings for you to adjust the VFD screen's brightness. You only need to press the VFD

darkness select button (DARKNESS) on the remote control in standby mode, then choose the proper lighting to be

used.

Listening to Radio Broadcasts

You can listen to FM and AM stations. Stations can be tuned in manually, automatically or from preset memory

storage.

Caution: Before listening to the radio, please check that both the FM and AM antennas are correctly connected.

Tuning in a station

1. Repeatedly press the function select button (FUNCTION) on the unit or directly press tuner function button

(TUNER) on the remote control to select TUNER function.

2. Press the band switch button (BAND) to select the band.

3. Use one of the following methods to select a station.

w Manual tuning

Press the tuning backward button (TU-) or tuning forward button (TU+) repeatedly to move from frequency to

frequency until you find the station you want.

w Auto tuning

If you press and hold the tuning backward button (TU-) or tuning forward button (TU+) for one second or more,

the frequency changes down, or up, automatically until a station is found.

w Preset tuning (Possible only after presetting stations)

Press the preset stations button (PRESET) on the unit or channel select backward button (CH-) or channel select

forward button (CH+) on the remote control one by one to select the preset number to select the desired preset

number. Its band and frequency are displayed on the VFD.

Presetting stations

You can preset up to 16 FM stations and up to 16 AM stations.

1. Tuning in the desired station.

2. Press the memory button (MEM) on the unit or memory button (MEMORY) on the remote control, the MEM

will flash on the VFD.

3. Press the preset stations button (PRESET) on the unit or channel select backward button (CH-) or channel select

forward button (CH+) on the remote control one by one to select the preset number to select the preset number,

MEM will flash on the VFD display and will preset the number.

* PRESET To select cyclically one of the 16 preset number

* CH- Decreases the preset number by 1

* CH+ Increases the preset number by 1

4. Press the memory button (MEM) on the unit or memory button (MEMORY) on the remote control to store the

station. After 1 second, the VFD returns to the broadcast frequency display.

5. Repeat above steps 1 to 4 for each station you want to store to memory with a preset number.

Note: If the system is unplugged or if a power failure occurs, the preset stations will not be erased.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Telefunken TNE 1302 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info